Club G40 Forum
Classifieds => Parts for sale => Topic started by: grungeisdead on November 03, 2016, 11:56:08 pm
-
Open to offers, collection from Leeds, can post
G40 Front Shock Inserts - Used - sold
G40 Cam & Pulley - 50
Polo G40 Inlet Manifolds x 2 - 35 each
G40 Polo Mk2 Standard Intercooler refurbed - 175 plus used one 125
Polo G40 Servo - 20
GT Head rebuilt with double-valve springs, sodium filled valves around 10k ago. - sold
Big valve head - 30mm/37mm - SOLD
Eaton M45 charger, pullies, belt, brackets & chip - 350
Crane cams 268/268 cam - SOLD
Schrick 268/268 - 80 needs repair to dizzy end, has cracked
G40 Exhaust Manifolds - SOLD
Dewedged G40 Throttle Body - SOLD
G40 Looms - SOLD
G40 ecu's - 100
G40 clutch and pressure plate - sold
G40 injectors - 30 for 4 or 10 each
GT injectors - sold
G40 TCA's - require new inner ARB bushes, ideal for g-ladersiete bushes. - 70
1W build - £1000
1W diesel bottom end
1W engine block with oil squirters (+ 2 spare squirters)
Block has not been bored out to 77mm - expect £100 cost for this
1W crankshaft (low miles - no wear)
Accralite 1473 77mm forged pistons - (BNIB)
(Part no 9905 x77 - Ring widths, 1.5mm/1.5mm/2.5mm)
Rods
Complete bearing set (brand new) (big end and main bearings)
Loads of gaskets including each end of the crank
Oil Pump
VAG water pump
Sump
-
Are the PY blocks still for sale?
Cheers.
-
Interested in either the standard block with the melted piston or the bored and honed block if either are still available?
Cheers.
-
Still got the clutch? How many miles / how worn is it?
-
Have you had any interest in the eaton?
-
Still got the clutch? How many miles / how worn is it?
still got it, looks decent. will dig it out this week
-
Have you had any interest in the eaton?
yourself and another 2 guys but noones come up with the reddies yet
-
Is everything included to get the eaton running?ive been after one for a while,Ive got 280 in my car fund and can find the rest if everything is there to get it going my friend
-
I'll have the clutch kit mate, will PM you now.
-
Hi, is the big valve head still for sale?
Thanks!
-
Hi,
Do you still have either or both of the standard intercoolers for sale?
Cheers
-
Hey buddy only standard intercooler I have is a Mk2 g40 item not mk3
Bvh is still here james
-
Bought a new clutch in the end. Fitting it today, joy of joys...
Eaton kit; which one is it? Dare I ask, is it reliable?
-
Hey buddy only standard intercooler I have is a Mk2 g40 item not mk3
Doh! Ok mate, no worries.
-
Bought a new clutch in the end. Fitting it today, joy of joys...
Eaton kit; which one is it? Dare I ask, is it reliable?
Never ran it, looks like a custom job, with a PSD eaton chip.
Eatons should be reliable, sealed units so should do 100k without servicing. Too noisy for me so I've never had the inclination to use it
-
Updated list - got more bits and bobs that I've found over the last month, will get a list together at some point and can bring anything to polo social
-
PM'd
-
bump, posted updated. Do have more things to list, will be doing a further sort this week and will get bits listed
-
Pm'd