Club G40 Forum

Technical => Superchargers / G-Lader => Topic started by: Bushpig on January 28, 2015, 10:20:55 pm

Title: Anybody used this German company.
Post by: Bushpig on January 28, 2015, 10:20:55 pm
http://stores.ebay.co.uk/gladenmotorsport/1-3-Liter-Polo-G40-8V-86C-/_i.html?_fsub=2758225017


Is this too cheap considering bar-tek version is pricey?

Cheers Danny.
Title: Re: Anybody used this German company.
Post by: randombadger69 on January 29, 2015, 01:11:49 pm
Awesome prices!

Depends what you're buying. A schrick camshaft is the same wherever you buy it!
Title: Re: Anybody used this German company.
Post by: Bushpig on January 29, 2015, 01:22:22 pm
Sorry was suppose to be a link to toothie kit.
Title: Re: Anybody used this German company.
Post by: Jezza-7 on January 29, 2015, 08:41:05 pm
I run the same toothed belt kit as that. From a different person but they are good. Slightly more whine than the PSD ones, also they are heavier than the PSD ones but won't wear the same. Don't think the weight difference will have any impact, i ran PSD ones and can't tell the difference. Actually prefer these ones, plus i haven't stripped any teeth on the belt which is a bonus. Still on the same belt since last april/may.
Title: Re: Anybody used this German company.
Post by: Jezza-7 on January 29, 2015, 09:02:41 pm
i bought these below but they are all the same. Just that guy you found is cheaper.

http://www.ebay.co.uk/itm/Precision-HTD-timing-belt-drive-G40-Kluber-optibelt-gt-/281391653347?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item41843fe1e3