Club G40 Forum
Technical => Superchargers / G-Lader => Topic started by: John-125 on November 04, 2014, 09:01:51 pm
-
Putting a g60 charger on my g40 can I have oil lines made up or do they have to be a certain length ?
-
I'd look into getting some made to fit, but they could cost a lot.
G40 standard one will more than likely be too sort. I know the G60 has a really long oil feed so you could just buy one of them as it should be plenty in length.
Have you looked into a standalone oil system?
-
g40 and g60 feeds on their respective engines are the same part!
so maybe a stock feed will fit... then extend the drain with some hose.
-
I've just fit my G60 and as Pete said the oil feed is fine, for the drain I bought some hydraulic hose with the same internal diameter cut it to length and that seems to be working fine.
-
Thanks guys think I'm gunna have some made up as then my be able to hid the lines a bit more
-
i'd ensure they are exactly the same diameter, as they regulate oil flow.