Club G40 Forum
Technical => Superchargers / G-Lader => Topic started by: Jezza-7 on April 22, 2014, 06:29:08 pm
-
Took it off the other day and i thought it looks like its a little worn. Has done about 30k and always correct belts used.
Any opinions?
(http://i443.photobucket.com/albums/qq157/jezza-3/DSC_0620_zpsa5405483.jpg) (http://s443.photobucket.com/user/jezza-3/media/DSC_0620_zpsa5405483.jpg.html)
(http://i443.photobucket.com/albums/qq157/jezza-3/DSC_0621_zps98891d5b.jpg) (http://s443.photobucket.com/user/jezza-3/media/DSC_0621_zps98891d5b.jpg.html)
(http://i443.photobucket.com/albums/qq157/jezza-3/DSC_0622_zps9b069e63.jpg) (http://s443.photobucket.com/user/jezza-3/media/DSC_0622_zps9b069e63.jpg.html)
(http://i443.photobucket.com/albums/qq157/jezza-3/DSC_0623_zpsf1680af1.jpg) (http://s443.photobucket.com/user/jezza-3/media/DSC_0623_zpsf1680af1.jpg.html)
-
Rubber beats steel? Rock beats scissors?
-
There ally pulleys. These are phase 1 PSD pulleys i believe.
May have to get some steels ones.
-
I think your belt has been too tight - mine have half that mileage but totally unmarked. The anodising is a little shinier where the belt runs. Mine are tensioned like a cambelt i.e. able to get 90 degree twist on the longest run.
-
I have run the same though for belt tightness.
If your are the anodised ones they wont wear as quick as these ones.
-
Fair doos. Steel ones should last forever.
-
Yeah maybe its time to get steel ones. Or just wait for an anodised set to pop up, but that could be a while.
-
Those are psd phase 2s
-
How can you tell? I though they were anodised black?
-
I got the same pulley, and there still perfect, quite savage wear that!
-
Haha, joke failed, i meant alloy :S
thats some serious wear though! i highly recommend my steel ones though :) no wear at all!!
-
What ones you get mate?
These ones?
http://www.maxrpm.de/Toothed-belt-drive-conversion-kit-for-VW-Polo-G40
-
psd phase ones have guides on the alternator and charger pullies, the guides are gold and the pullies are gunmetal grey and they pullies dont say psd on them at all!
-
Thats the ticket :) though mine were all black :S
-
Wow thats some bad wear!
I used to own phase 1 PSD toothies which had he guides and they seemed fine.
Just bought the kit from MaxRPM and will be fitting once rebuilt my charger so will let you know how they are.
-
Steel ones are mega heavy...need to see about chopping some holes into them. Balanced of course!