Club G40 Forum
Technical => Turbochargers => Topic started by: giog40 on March 27, 2014, 07:10:19 pm
-
I would like to know what type of headbolts you guy's are using
And how high your headgasket is.
And how much psi you will put on stock pistons and rods
Thank you all in advance.
-
For my car:
- stock Polo CL headbolts
- Polo 6N AEX engine code headgasket (thin)
- 23psi of boost from a K03
- stock rods
- Accralite forged pistons 9:1 compression ratio
-
exactly the same as Andy but standard cast pistons (not for long though).
-
im about to list stock cl headbolts from febi at £10 a set of 10 in my section for reference
-
im about to list stock cl headbolts from febi at £10 a set of 10 in my section for reference
Any joy with the pukka PY ones?
-
na cant get em only place i think supply pukka g40 apart from the dealers is BGA