1) mk2 Coupe S rear bench seat. Will also fit right in a mk3 polo. Very good condition, no wear, no holes, no mould.
(http://derby.polog40.co.uk/photos/forsaleapril2013/coupe_s_bench.jpg)
£10 collection only
2) G40 inlet manifold. Totally standard.
(http://derby.polog40.co.uk/photos/forsaleapril2013/g40_inlet.jpg)
£10. Can deliver for an extra £5.
3) Induction kit fitting coller for G40 supercharger and a blanking plate. Perfect parts for boost-return removal and/or induction kit fitting.
(http://derby.polog40.co.uk/photos/forsaleapril2013/induction_collar.jpg)
£20 delivered.
4) Two Kumho Ecsta tyres. 185/55/14. These are essentially brand new. I had to quickly buy a pair of tyres to pass an MOT but have since replaced all four tyres on the car as a set. Therefore, these tyres have done less than 50 miles, on the rear wheels.
(http://derby.polog40.co.uk/photos/forsaleapril2013/kumho_tyres1.jpg)
(http://derby.polog40.co.uk/photos/forsaleapril2013/kumho_tyres2.jpg)
(http://derby.polog40.co.uk/photos/forsaleapril2013/kumho_tyres3.jpg)
(http://derby.polog40.co.uk/photos/forsaleapril2013/kumho_tyres4.jpg)
These are currently £50.20 each on mytyres.co.uk.
I'm asking £80 for the pair, including mainland UK delivery.
5) 115mm x 7 row Setrab oil cooler & Mocal fitting parts. Included are: Setrab 7-row heat exchanger, various Mocal fitting parts (all the fittings you'd need) and a piece of oil pipe. This came with a car I bought. It appears to have never been fitted to anything as it is all clean and new. For reference, here is the heat exchanger on Think Auto (it's the very top one):
http://www.thinkauto.com/acatalog/On_line_shop_115mm_width_9.html
(http://derby.polog40.co.uk/photos/forsaleapril2013/oil_cooler1.jpg)
(http://derby.polog40.co.uk/photos/forsaleapril2013/oil_cooler2.jpg)
(http://derby.polog40.co.uk/photos/forsaleapril2013/oil_cooler3.jpg)
£50 delivered within mainland UK.
6) G40 charger outlet dome. Totally standard, good condition with no damage.
(http://derby.polog40.co.uk/photos/forsaleapril2013/outlet_dome.jpg)
£10. Can deliver in mainland UK for a couple of quid extra.
That is all!
Oh, for anyone wanting to collect. All items are located in Heywood Lancashire. Or I can take them to work near Huddersfield if you want to collect from there but only weekdays before 5:30pm.
Would you do the oil cooler, charger collar/blanking plate for 60?
Hi Craig, yeah go on then that's ok. Do you need them delivering or do you want to pick them up?
If delivery, can you post a cheque or paypal as a gift to avoid charges (or you can add a couple of quid to cover the paypal charges)?
Yh thats fine I'll send as a gift through paypal whats your paypal address?
And id need them delivering
Pm sent!
Still have all this stuff, any offers before it all goes on ebay?
paul - ill take teh bench off your hands, no rush for it at all tho
are you in my area at any point? could do with the garage space you see :)
i work in bolton, finish at 6 and then normally off to my unit after that. so dunno if its easier just for you to drop past on your way home
my numbers 07950 675 910 drop me a bell in the evening and we'll sort summat out
is your unit still in salford? I don't really go near either place on my way. I can keep hold of it for now, unless anyone else takes it.
no worries, pm me your addy n number and ill see what i can boost over
Any offers on any of this stuff?
Did you sell the oil cooler?
no, all this stuff is available now still.
I'll take the oil cooler then please!
OK cool. Do you want it posting? How do you want to sort payment out? Send me a pm...