I have tonnes of g40 stuff clogging up my cellar, here are a few can get pics up on request ;
2 x G40 alternators
2 x G40 Throttle bodies (1 is the mk2 G40 throttle body)
1 x Glader Chargers ( 1 needs a service which is standard with 65mm pulley)............................ (150 with 65 pulley)
1 x R1 Glader ( Needs inlet side spare casing port matching (£60) and a service for peace of mind).... (200 with 65 pulley)
2 x G40 ECUs ...£80 each
1 X G40 map for 65mm pulley and induction kit........................................................................ £35
1 x G40 map for R1 charger, G60 injectors, induction kit and exhaust mods. .............................. £40
I literally have boxes of G40 stuff including mounts, intercoolers (G60 and G40 and BMW ).......... Offers
Also have a mk2 G40 block sat doing nothing aswell as 3 good condition G40 pistons.................. £150 for the block Offers on pistons
G40 exhaust manifold and downpipe with cat cut out and stainless tig welded in and lambda nut then Stainless straight through with flanges £ 150
Loads of other stuff people
Located in Meersbrook, Sheffield
Hi matey...do you have a set of TCA's with good ball joints and possibly decent bushes in? Cheers in advance man ;D
Hi how much for the alternator. i am in sheffield so could collect .
Pm'd both
Any chance you have an alternator tensioner bracket as mine somehow snapped
Any chance you have a G40 Distributor? I'm under the assumption that they're different to the GT/mpi engine ones and can't find one anywhere.
Craig is that the Non G40 bracket? I seem to remember the alternator belt being tensioned with the Glader pivot? I do have a few of those brackets though. 5 posted
Jester Yes I do mate, the cap seems to have cracked in storage but the dizzy looks fine. 30 posted?
sent you a PM :) ^^
pm'd
Possibly it bolts to the bottom of the block and has teeth down the one side? If you do then I'll take 1
I have about 2-3 of these dude, pm me and we can sort paypal out
G40 Dizzy Sold, mk3 TB sold
Any g40 starter motors mate ?
G40 driver's height adjustable seat base by any chance?
g40 distributor? pm me
I have a starter motor , don't have seat frame or an dizzys left dude sorry!
im after a stock airbox and pipe to charger, and the other inlet to charger pipe that attaches to rocker cover?
stock pulleys? charger one not needed dont think
I have all that dan haha! Will have a look through after the weekend (at Santa pod£
sweet! give us a shout when is good for you, will check car over and see if anything else is needed!
Both Chargers, air box , boost return pipe and some more bits have gone
not sure if u have these tom but..sidelight bulb holders and the proper brake fluid res cap .
Sorry dude, don't think I have either :(
No worries
Don't happen to have a freshish none cracked rain tray cover and a decent cone filter heat shield?