Basically i'm after something which is obsolete at the dealers for this
(http://i137.photobucket.com/albums/q236/etches69/AB8CB509-1980-4651-911E-13252A30C7E1-137-000000283FCAF537_zpsa0d9b413.jpg)
Debating whether to just use some heavy duty sealant I have (final systems) which worked fine on the rocker cover.
What have people chose to use ?
Cheers
Etches
i see a paper gasket on mine, but as they are obsolete now can you get some basket paper and just cut one the same shape? maybe take a rubbing on a piece of paper then cut it out and use it as a template for your gasket use a wad punch for holes or if you don't have one very small sharp scissors.
If not as you say Im sure a servant would work.
On a side note have you checked these gasket arnt available direct from other manufacturers such as erling can't remember if you get on of these in a "bottom end gasket set"
I got one of those gaskets in my rebuild kit. i will have a look and check who makes the kit.
I need one of these too, so any info would be good.
drcarparts on ebay - this is part number - i think it was about 6.50
Crankshaft Gasket (Gearbox End) 026103181B
you get them in bottom end rebuild kits, vw heritage had a sale the other day and they were 25 quid
http://www.ebay.co.uk/itm/310549797835?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
That link isnt for our polos dude, it says incompatible :(
ALthough it looks like it does fit
I've bought gasket paper and sealant so I'm guna have a go at cutting it out...
ive got a g40 oil pump and a spare one of those gaskets kicking about, so i can check if required
I can definitely confirm that it fits my HK engine
I got an original if u need to trace
Manned it out, with plenty of liquid gasket it sound be fine
(http://i137.photobucket.com/albums/q236/etches69/145D6620-8DB4-4DDB-A984-35CBDDF021C6-137-000000769B378DBD_zps3b1a0969.jpg)
I need one of these so being doing some digging,
Oe part no
030103161c
Elring 703168
Have emailed elring to ask if they can still supply them will update when I find out