Print Page - How to connect boost switch [Inside TB]

Title: How to connect boost switch [Inside TB]
Post by: AdzCM on February 03, 2013, 06:17:59 PM

I've seen this roughly explained on other threads but I still don't follow clearly.

(http://img844.imageshack.us/img844/1129/wotremoval.jpg) (http://imageshack.us/photo/my-images/844/wotremoval.jpg/)

Do I connect the brown/yellow wires to the boost switch then leave the other 'idle' switch the way it is? Or what do I do with it?

Adrian

Title: Re: How to connect boost switch [Inside TB]
Post by: AdzCM on February 05, 2013, 02:58:06 AM

Anyone?

Title: Re: How to connect boost switch [Inside TB]
Post by: Etches on February 05, 2013, 09:20:39 AM

Its just the full throttle switch you cut and wire into the pressure switch dude, i can get you a pic of mine if you want?

Title: Re: How to connect boost switch [Inside TB]
Post by: dub-disaster on February 05, 2013, 10:37:34 AM

yes it is those two wires you have to switch

Title: Re: How to connect boost switch [Inside TB]
Post by: AdzCM on February 05, 2013, 11:30:40 AM

No need for a pic if its just those 2 wires you connect to the boost switch :) but thanks anyway.

Thanks for that guys.

Title: Re: How to connect boost switch [Inside TB]
Post by: jez1272gt on March 05, 2013, 04:18:22 PM

Is there any specific orientation between these wires and the boost switch? I assume not...!?

Title: Re: How to connect boost switch [Inside TB]
Post by: dub-disaster on March 05, 2013, 08:07:50 PM

you assume correctly! :)

Club G40 Forum

Technical => Turbochargers => Topic started by: AdzCM on February 03, 2013, 06:17:59 PM