Right selling off some of the bits from the G40..
Got a full eaton m45 set up which includes a psd chip (will need to confirm this) engine mount and belt set up, all the boost pipes,hose joiners, air filter and fmic
all the blades still have coating and are in excellent condition, pulley could do with being replaced as im guessing someone has used pullers on them or something but ive still managed to run my belt on there.
Looking for £450 for the full charger set up
Got a full john ashley stainless exhaust system im sure its 2.5" bore and 2.5" rolled tip - £150
Stainless 4 branch which has had a crack welded up and has been fine ever since - £80
GT gearbox code is AHD selects all gears fine but sometimes has a small crunch in reverse when cold, has had a brand new genuine selector shaft seal fitted too - £80
Can post for an extra cost but will need to find out prices via courier.
Located Bridgend - CF31
Interested in the john ashlely exhaust system do you have any pictures?
Havent really got many pictures of it.. only on the car..
(http://i79.photobucket.com/albums/j135/triviumbloodyrule/548246_4692367426572_1576595210_n.jpg)
also a video of it.. http://www.youtube.com/watch?v=JBjeA1opae4
Interested in the 4 to 1
pm replied to
Dont suppose the eaton kit comes with a cam does it? or do you have one available? is there anything else i would need to carry out the conversion to my g40?
Taylor
Quote from: z3i on January 25, 2013, 07:24:17 PM
Dont suppose the eaton kit comes with a cam does it? or do you have one available? is there anything else i would need to carry out the conversion to my g40?
Taylor
Used the stock cam and that's pretty much all you'll need other than injectors
Ok mate thanks :) will get back too you
interested in the ashley exhaust and 4 branch manifold where a bouts are you?
Everything has sold ages ago