Having a bit of a clear out of spares... all prices based on collection from Manchester...
G40 Charger - Jabba Serviced, believe it needs the oil seals replacing, porting does not look very heavy. - £175ono SOLD
65mm V Belt Pulley - £35
(http://img442.imageshack.us/img442/3836/20120511191928.jpg)
(http://img88.imageshack.us/img88/7546/20120511191939.jpg)
Injector Jackets - £25
(http://img842.imageshack.us/img842/3958/20120511191613.jpg)
(http://img233.imageshack.us/img233/9231/20120511191645.jpg)
Throttle Body - dewedged using epoxy resin - £70
(http://img259.imageshack.us/img259/8950/20120511194126.jpg)
(http://img706.imageshack.us/img706/5946/20120511194144.jpg)
(http://img687.imageshack.us/img687/329/20120511194034.jpg)
G40 Injectors - 030 906 031B - £40 SOLD
Charger Outlet Collar - £20
(http://img600.imageshack.us/img600/480/20120511191400.jpg)
(http://img232.imageshack.us/img232/3973/20120511191411.jpg)
G40 Inlets x2 - 030 129 713 D - £20
One
(http://img842.imageshack.us/img842/1138/20120511191908.jpg)
Two
(http://img40.imageshack.us/img40/8940/20120511191330.jpg)
G40 Intercoolers x2 - £25
One - One of the two lower studs has snapped but these are removable iirc.
(http://img528.imageshack.us/img528/4968/20120511190926.jpg)
(http://img820.imageshack.us/img820/7412/20120511190912.jpg)
Two
(http://img706.imageshack.us/img706/2483/20120511194243.jpg)
(http://img804.imageshack.us/img804/8088/20120511194229.jpg)
G40 Engine Mounts x2
One - Decent Condition - £25PROVISIONALLY SOLD
(http://img233.imageshack.us/img233/9448/20120511192524.jpg)
Two - Modded for ease of manifold removal pretty poor job but could easily be tidied up - £20
(http://img840.imageshack.us/img840/9855/20120511191522.jpg)
(http://img85.imageshack.us/img85/3678/20120511191508.jpg)
K&N Induction Cone with Charger Inlet - £15 [/B]
Any questions let me know,
Cheers,
Ad
Can you do this for £25 delivered? If so I'll have it...! :)
(http://img233.imageshack.us/img233/9448/20120511192524.jpg)
Cheers,
Chris.
Sorry mate this is provisionally sold as I have said I will meet the guy at All Types...
The other is still available and can be.tidied up as I have done the same on my G40's... but fully understand if this is not of interest...
Cheers
Ad
Does that 'stem' actually do anything then? It's just that I've got a MK1 Polo G40 that I'm building and ground some of that part out to make way for the 4-branch (the MK1 'bay is smaller than the MK3/2f). If that bit you've cut off doesn't actually do much then mine will be fine anyway?
Cheers,
Chris.
Hi mate - project sounds good! Hoping to.do.the same soon so may be.in touch for some advice if you are a few steps ahead of me! I do not use that stem.on mine but it can be used as an additional support for the charger/assist in holding tension... this would bolt to a g40 manifold but guessing you have a standard polo four branch if you had to mod to get it fit around the charger so you would not have the mounts on the manifold to bolt this to anyway! It is certainly not a necessity but obviously vw put it there for a reason!
Feel free to pm.me.if you want to discuss further and I'll send you my mobile number...
Cheers
Ad
Can bring any parts to All Types... Cheers
Ad