Right need to free up some cash for tools. So I'm putting my comps up for grabs.
So I have 4 recently painted in candy red compomotive cxn's. Specs are as follows:
2 x 7.5J (1" outer dishes)
2 x 8J (1.5" outer dishes)
I'm not sure of offset I shall measure them.
4x100 57.1 centre bore, so ideal for VW or E30 BMW.
All the outer dishes are brand new old stock from compomotive and have done no more than 150 miles since re-assembly. Tires are Toyo T1R on the 7.5J's. On the 8J's we have a pair of budget Event tyres all in 195/45/16. The tyres also have done less than 150 miles.
Will come with 4 x stainless steel taper-fit valves needed for the 1" dishes valve holes as they are 10mm.
(http://alkaspace.com/usr/7105/IMG_2127.JPG)
(http://alkaspace.com/usr/7105/IMG_2128.JPG)
(http://alkaspace.com/usr/7105/IMG_2129.JPG)
(http://alkaspace.com/usr/7105/IMG_2131.JPG)
(http://alkaspace.com/usr/7105/IMG_2132.JPG)
(http://alkaspace.com/usr/7105/IMG_2133.JPG)
I'm after £1000 with tyres.
Will listen to offers without rubber.
Also the outer dish stock is up for grabs. These are all 30 hole to fit 16" CXN.
4 x 0.5 " outer dishes. Need to check but think these are 10mm valve holes. Will come complete with s/s valves. Used in good condition no curbing, but need a good polish. £150
(http://alkaspace.com/usr/7105/IMG_2109.JPG)
(http://alkaspace.com/usr/7105/IMG_2113.JPG)
2 x 1.5" outer dishes. Polished finish. Standard size valve hole. These are brand new in the box never fitted. (Still have the reciept for £235). I'm asking £190
(http://alkaspace.com/usr/7105/IMG_2116.JPG)
(http://alkaspace.com/usr/7105/IMG_2119.JPG)
(http://alkaspace.com/usr/7105/IMG_2114.JPG)
2 x 2" outer dishes. Standard size valve hole. Anodised finish. Again Brand bew in the box with reciept. £190
(http://alkaspace.com/usr/7105/IMG_2121.JPG)
(http://alkaspace.com/usr/7105/IMG_2123.JPG)
(http://alkaspace.com/usr/7105/IMG_2124.JPG)
2 x 3" outer dishes. These are polished finish. Standard size valve hole. These are mint condition have been fitted, driven once. These have slight curbing on one dish. This could easily be polished out with the right procedure. Other than this mint. £160
(http://alkaspace.com/usr/7105/IMG_2106.JPG)
(http://alkaspace.com/usr/7105/IMG_2104.JPG)
(http://alkaspace.com/usr/7105/IMG_2102.JPG)
(http://alkaspace.com/usr/7105/IMG_2101.JPG)
Wheels and dishes located near Diss, Norfolk. Prefer collection, or can deliver for cost. Postage can be arranged at buyers expense. Will sell as a job lot if a serious offer is made.
Any questions just ask.
Andy 07706 795 885
email 1272works@gmail.com