Planning to change the fuel system later this year.
Im planning to get a sytec 135ltr/p hour, a fuel filter and change the complete fuel lines for braided ones. Last time i did the filter the hose was not the best so will be ideal to change it all.
Would i need to upgrade the in tank pump at all? This was replaced last year.
Has anyone replaced the fuel lines before?
Also say if i got 4 metres of line, when i cut it to suit how does it all connect with the hose clamps you can get?
Like these
http://www.demon-tweeks.co.uk/performance/fuel-fittings/sytec-pro-clamp-hose-finishers
(i know this may be few weeks old and already answered but!) After doing some research for a while now, seeing that our G40 pumps are approx. 75ltr/hour are capable of 200bhp
we do not need much of an upgrade ..
this BRAND NEW bmw pump is also 135ltr/hour
http://www.ebay.co.uk/itm/250443070382?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649#ht_11333wt_956
and my understanding is that the in tank pump never has to be upgraded as its only a feed to the main pump.
if anything is wrong i do not mind being corrected....
my car has braided lines running inside the car. I used the goodridge version of those posh fittings to do the pump>filter then i fitted bulkhead fittings and had to buy the extortionately expensive connectors that you mount to the braided line with a compression fitting and an olive and then obviously banjos at the throttle body.
the fittings are the most expensive bit by a long way!