Print Page - K03 ROTHE manifold outlet diameter

Title: K03 ROTHE manifold outlet diameter
Post by: dubstar on March 06, 2012, 12:42:37 PM

Hi Guys,

Can anyone tell me what the diameter of the outlet is of the K03 ROTHE manifold please?

(http://i1017.photobucket.com/albums/af295/shibbyreet/IMG-20111117-00048.jpg)

Thanks in advance,

Ross.

Title: Re: K03 ROTHE manifold outlet diameter
Post by: N1CKY on March 06, 2012, 08:25:40 PM

Ill check tommorow when im in the garage on that exact manifold seen as though you used my picture ;)

Title: Re: K03 ROTHE manifold outlet diameter
Post by: dubstar on March 06, 2012, 08:26:33 PM

haha! Top man - thanks a lot ;D

Title: Re: K03 ROTHE manifold outlet diameter
Post by: breadman on March 06, 2012, 09:43:11 PM

Just checked my Rothe manifold - 39.2mm.

Title: Re: K03 ROTHE manifold outlet diameter
Post by: dubstar on March 07, 2012, 10:11:00 PM

Thanks breadman, that's great. :)

Title: Re: K03 ROTHE manifold outlet diameter
Post by: Robin on March 08, 2012, 07:41:51 AM

Breadman don't suppose you could measurement the distance between the 3 bolts holes could you please? I need to buy a new gasket but need the bolt hole spacing measurements.

Title: Re: K03 ROTHE manifold outlet diameter
Post by: breadman on March 08, 2012, 09:07:32 PM

Ok Robin, as you look at the holes in the pic (all c/c)
Left (bottom) to right = 50mm
Right to top = 59mm
Top to left = 55mm.
All holes 14mm dia.
Hope that helps,
Richard.

Title: Re: K03 ROTHE manifold outlet diameter
Post by: Robin on March 08, 2012, 09:10:29 PM

Thanks richard you're a star!

Club G40 Forum

Technical => Turbochargers => Topic started by: dubstar on March 06, 2012, 12:42:37 PM