right im hoping someone can help with this....im putting a g40 into my mk2f van whitch started out as a single point.iv changed all the looms in the engine bay (white plug/black plug/engine)for the g40 ones engine turns over and iv got power going into both the relays at the side of the ecu but no power coming out so iv not got a spark and the fuel pump will not prime!!!!!!iv changed both relays three times and still the same,am i missing something im not realy that clever with the wiring side of things
so any help would be great
make sure you've got the two plugs by the coil the right way round!
yeah mate first thing we did me mates got a g40 too had a look at his
spent last 4 hours on it checked all earths made shure all plugs are ok still nothing :'( :'(
dose anyone know of someone near wakefield thats good with electrics that may be able to help??????
thanks
check fuse box plug are in right!
hi pete yeah iv done that aswel..thinking of taking the loom out and checking everything make shure all wires are ok...
fuse box is right think all bring my gee over and label the wires and then put loom back in dude but it comes at a price of one of ur nice brews matey see what i wrote there haha
i seen what you wrote there dude hahahaha yeah im going to take all the loom out tomoz matey.......
Why dont you use a multimeter and the autodata wiring diagram to check your loom without taking it out of the car?
http://www.polog40.co.uk/forum/index.php/topic,5284.0.html
thanks for the link mate but it wount open not shure why....everything seems to be going wrong lately :'(
will it matter that the van was a single point could there be anything in the car loom that i need to look at ????
shouldn't be - just a different fuel pump
i was afraid of that back to drawing board,checked all connections again today and earth, took the fuse box out and gave it a good clean. put it all back and still nothing
does it turn over? but just not spark and no fuel?
sounds like the hall sender in the dizzy is fecked
yeah pal turns over fine,but no spark and pump not priming no power going into coil either,on the 4 connection relay under bonnet 3 of the 4 wires have power the red and yellow one dosent
i'd mark gaz's dizzy and try that on yours. only a 10 min job
i will pal think he's coming round tomorrow night
quick update tried a my dizzy on my mates benets car today,another gee and worked fine i'll ckeck the ecu tonight and see if thats had it aswel
best way - keep swapping bits over!
sorted it pete mate,very strange i put my old white plug side of the loom into me van (i had put it in our kids polo when we put my gt lump in his)and it fired up!!!!so we thought maybe its that loom bit thats crap so we tried it in a kids car and his fired up too ???very strange