How do you remove it, is it just a case of getting a flat blade screwdriver tapped under lhe lip and then prying it away from the block?
Any help would be great as im going to tackle it this weekend.
Gav
Yeah there very tight. I ended up doing the screwdriver trick, just dont hit it too hard in unless your replacing it. The other way you might be able to do is gently hit it with a rubber mallet.
remember to use some sealant as you put a new one on or put the original one back one, to make sure it doesn't ooze!
Ok no probs.
I was going to use some liquid gasket stuff so i get a good squese out so i know its sealed.
Cheers fellas
Gav
Make sure it's oil resistant sealant else it won't work out too well!
Yea its the same stuff i used for the gasket on my oil sump.
I used gasket seal stuff. Its really good.
Good good, thats what i like to hear. Seeing as i havent driven the car yet since i have started the build.
i just bought a new one and beat it in with a nylon mallet although fingers crossed mine doesnt leak !!
Ill try and take pics as i go and make a walk through for others to use in the future.
Maybe we could get the forum updated with a how to section, and get all the different walk through's and how to's all put in one place.
Gav