Print Page - G40 block and ECU

Title: G40 block and ECU
Post by: brownysblower on April 28, 2011, 07:27:16 AM

Hi has anyone got a G40 block and ECU for sale
only need block my crank and rods are ok
many thanks
chris

Title: Re: G40 block
Post by: brownysblower on June 07, 2011, 08:58:33 PM

Has no one got a used block they want to sell, need an ecu as well

Title: Re: G40 block
Post by: Jezza-7 on June 07, 2011, 09:06:02 PM

Are you going to rebore it? I have 2 blocks and both need rebore.

Title: Re: G40 block
Post by: brownysblower on June 07, 2011, 09:46:19 PM

I would be interested in the block with melted piston
i could get interlink to pick it up if you could clean it up of it oil and pack it in wooden box or small crate
many thanks
chris

ps you got same bollox from brian at jabba as i did
but i had receipt and witnesed them dropping my ECU but still get fook off and i have been customer for 10 years

Title: Re: G40 block
Post by: Jezza-7 on June 07, 2011, 10:47:03 PM

Will let you know which one mate as i need to see which one im gonna use.

Title: Re: G40 block and ECU
Post by: brownysblower on June 17, 2011, 07:34:23 AM

Hi all has anyone got a block or ecu at all
many thanks
chris

Title: Re: G40 block and ECU
Post by: youngprodigys on June 17, 2011, 08:07:44 AM

whats up with your ecu? you say they dropped it - did it snap the board inside?

Title: Re: G40 block and ECU
Post by: Insight G40 on June 19, 2011, 11:18:35 AM

I've got an ecu, located in Alton, Hampshire.

£100 ono

Title: Re: G40 block and ECU
Post by: brownysblower on June 23, 2011, 07:41:32 AM

Many thanks I will have ecu pm me your location and phone number and i will come over and collect

the map senser part of board is broken as map senser works but fueling is static

Title: Re: G40 block and ECU
Post by: vwmk3jon on July 03, 2011, 06:12:57 PM

i've got a ECU for sale too ;) In parts for sale section

Title: Re: G40 block and ECU
Post by: Peterpolo on July 19, 2011, 06:05:20 PM

I got 2 blocks aswell both need attention! Both went bang and was told it was the bottom end, (not my neck of the woods) so will prob need re-boring and crank etc?? And I got a ecu I dnt use but not too sure about parting with it how much wld u pay? How much are they worth?

Title: Re: G40 block and ECU
Post by: ereeiz on July 20, 2011, 12:03:15 PM

One of those "however mush you're willing to pay" situations. I've seen a few sell for £30, and more sell for closer to £100, depends on the old supply/demand thing. I tried flogging a remapped ECU about 18months ago, think it ended on £15 on ebay with no bids. I'm gonna use it soon though and they're a pain in the ass to get hold of when they die so I'm keeping it now :D lol

Title: Re: G40 block and ECU
Post by: brownysblower on July 22, 2011, 05:07:11 PM

Hi Have got an ECU now
What are the blocks like ie melted pistons or fooked crank
ps where are you
many thanks
chris

Title: Re: G40 block and ECU
Post by: brownysblower on August 02, 2011, 01:23:28 PM

Bump !!!

Title: Re: G40 block and ECU
Post by: Jezza-7 on August 02, 2011, 06:32:50 PM

You want that block? Needs a rebore and will come with crank. Rods had to be used for my engine as 1 rod had been melted and the other had suffered damage from the piston problem i had.

Title: Re: G40 block and ECU
Post by: youngprodigys on August 06, 2011, 07:36:41 PM

block for sale on here!

pm me about ecu - may be able to fix it even if you do have a replacement

Title: Re: G40 block and ECU
Post by: cheddarcheese on August 23, 2011, 03:32:24 PM

i have a full engine block forsale and need it gone its done under 100k

Club G40 Forum

Classifieds => Wanted => Topic started by: brownysblower on April 28, 2011, 07:27:16 AM