Is an extra straight piece required to join the ppp sytem with a psd down pipe ??
I've trail fitted it now and relise I will be needing an extra straight piece so this thread can be deleted thanks
Should fit straight on...
???
Just looked at a few psd downpipes that where advertised on the fourm and they've all got a welded section in where as mine hasn't so I assume mines a german eBay copy or somthing and is why it's shorter!
ill take a picture of mine tonight if you want as its off the car and in my roon
turbo or 4branch? Got pics of mine right here ;)
Turbo, and yea please with the picture :)
(http://i965.photobucket.com/albums/ae140/jonjong40/IMG_1185.jpg)
Yup mines like that think I'm just being a spaz and need a straight piece of pipe as shown in this photo here courtesy of cheys03 aav turbo thread. Was just being thick as I assume this is where the cat went if one was fitted.
Do most people use a straight pics of pipe or do they stick a flexi in ??
http://s673.photobucket.com/albums/vv92/antywill666/?action=view¤t=photo-44.jpg
I just put a straight pipe in, my downpipe is an ebay special though.
A pukka PSD downpipe will deffinately mate to a PPP system :)
I have to say, the one in that picture looks very much like my ebay cheapo special
Quote from: Yoof on April 20, 2011, 01:03:51 PM
A pukka PSD downpipe will deffinately mate to a PPP system :)
this is via a cat or cat bypass pipe I assume ? Think mines probably a copy I'm sure the psf ones had a welded joint in them
Quote from: hayesey on April 20, 2011, 01:11:31 PM
I have to say, the one in that picture looks very much like my ebay cheapo special
My pic?
PSD Pipe:
(http://i.ebayimg.com/00/$(KGrHqZ,!hQE2fKuI4(jBNpDMuEruw~~_12.JPG)
Yup mines a copy as it has no weld in it, probably why I have slight fitment issue.
Bugger- If there's interest I'll get a run of 10 done with flexi pipes and and additional lambda bosses for easy mapping ;)
As usual be TIG welded and fit directly to our systems- will get quotes next week.
Quote from: vwmk3jon on April 20, 2011, 09:09:04 PM
Quote from: hayesey on April 20, 2011, 01:11:31 PM
I have to say, the one in that picture looks very much like my ebay cheapo special
My pic?
well actually, not sure. as the bit where that weld is, is covered up. I'm sure mine was the same length though and I had to weld an extra bit on to fit with my PPP exhaust.
I dont think theres a weld joint under the heatwrap but ill look later.
I dont know really what make my exhaust is so will probably need some extra pipe.