PPP 4-branch exhaust manifold SOLD
PPP exhaust system SOLD
PSD phase one toothies SOLD
(http://i56.photobucket.com/albums/g197/cheddarcheese_photos/13052011398.jpg)
jabba Stage 4 charger in need of service! £200ono
(http://i56.photobucket.com/albums/g197/cheddarcheese_photos/12052011386.jpg)
(http://i56.photobucket.com/albums/g197/cheddarcheese_photos/12052011385.jpg)
(http://i56.photobucket.com/albums/g197/cheddarcheese_photos/12052011384.jpg)
(http://i56.photobucket.com/albums/g197/cheddarcheese_photos/12052011383.jpg)
PSD full blend super charger in need a service! £200ono
PSD charger standalone oil supply kit £100 will come with two pumps
(http://i56.photobucket.com/albums/g197/cheddarcheese_photos/12052011387.jpg)
G40 120k complete head with out cam £150ono
(http://i56.photobucket.com/albums/g197/cheddarcheese_photos/12052011375.jpg)
(http://i56.photobucket.com/albums/g197/cheddarcheese_photos/12052011376.jpg)
(http://i56.photobucket.com/albums/g197/cheddarcheese_photos/12052011377.jpg)
(http://i56.photobucket.com/albums/g197/cheddarcheese_photos/12052011382.jpg)
(http://i56.photobucket.com/albums/g197/cheddarcheese_photos/12052011381.jpg)
G40 120k bottom end with internals and sump oil pump exe £200ono (sold)
Schrink G40 252/276 cam with vernier pulley £175ono
(http://i56.photobucket.com/albums/g197/cheddarcheese_photos/13052011401.jpg)
(http://i56.photobucket.com/albums/g197/cheddarcheese_photos/13052011402.jpg)
(http://i56.photobucket.com/albums/g197/cheddarcheese_photos/13052011408.jpg)
(http://i56.photobucket.com/albums/g197/cheddarcheese_photos/13052011407.jpg)
G40 standard inter cooler £40
(http://i56.photobucket.com/albums/g197/cheddarcheese_photos/13052011394.jpg)
G40 charger bracket £30
G40 alternator £40
G40 Dials £35 posted
(http://i56.photobucket.com/albums/g197/cheddarcheese_photos/13052011400.jpg)
Safety Devices 6 point bolt in roll cage with rear x-frame £600ono
Pictures of when it was new has been fitted to car since! And does have door bars not pictured can come with mounts but will require me cutting them out of car! SOLD SOLD SOLD SOLD SOLD
Mk1 Berg cup Arches £165
(http://i56.photobucket.com/albums/g197/cheddarcheese_photos/33998_400250162514_595412514_416883.jpg)
(http://i56.photobucket.com/albums/g197/cheddarcheese_photos/33998_400250142514_595412514_416883.jpg)
(http://i56.photobucket.com/albums/g197/cheddarcheese_photos/33998_400250152514_595412514_416883.jpg)
any interest or if you need any thing else please ask here not by pm thank you!!
pm'd regarding head.
and actually i may take the loom aswell. pm me mate
What spec/brand cam is it mate?
need to remove cam to find out spec will do this asap before end of week!
and cheers for the pm's but until i collect all my parts from various locations and check condition of parts i cant put a price so will let all know when i know.
but will give first refusals to the first to show interest in specific parts.
Quote from: cheddarcheese on March 14, 2011, 03:34:43 PM
PPP manifold £300 no offers
PPP cat-back system £300 no offers
PSD phase one toothies £150 !!!!!!!!!!!!SOLD PENDING PAYMENT!!!!!!!!!!!!1
Stage 4 charger in need of service oil seals have gone! £250
This is a feeler for all below show your interest!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Safety devices 6 point bolt in cage with x frame for polo 1-3mk £500 no offers
1 x G40 engine 95k no proof
1 x G40 bottom end
1 x G40 head
2 x G40 charger brackets
PSD charger standalone oil supply kit
G40 Loom
G40 ECU
G40 boost pipes
2 x G40 inlet manifold
GT inlet manifold
G40 standard intercooler
G40 uprated cam
G40 vernier pulley
G40 injectors with fuel rail
G40 throttle body
2 x G40 dials
any interest or if you need any thing else please ask here not by pm thank you!!
sorry i PM'd you, anyway - how much you looking for the stand alone supply posted?
where are you located?
thanks!
Pm'd- apologies! Interested in the bottom end mate.
PM'd.
Edit, sorry just noticed you said no pm's!
First dibs on the vernier pulley subject to condition and price. Any pics?
Cheers,
Richard.
oryt mate wer bouts are u, possibly interested in few bits tooth pullys, bottom end, throttle body lol
cheers
cheddar 10mins south of bristol!
toothies sold pending payment
standalone £120 posted i have seen two sold one for £180 and one for £150 will come with two pumps!
Price on the bottom end? Condition?
I'll definitely take the cage mate, let me know if you want to sell,
Cheers Josh
Ok josh will do :)
Is the cam vernier still available as it's no longer listed?
Thought I had 1st dibs?
i removed cam vernier as i keeping for turbo conversion!
loom i removed as i need it to copy for my custom loom!
bump!
bump got the internet back pictures up tomorrow!
I'll give you £30 posted for the g40 clocks
Quote from: Justin14100 on March 15, 2011, 07:10:06 PM
sorry i PM'd you, anyway - how much you looking for the stand alone supply posted?
where are you located?
thanks!
Justin i can pick this up for you if you want it as im just down the road from him.
Let me know mate!
Hi do you still have the alternator for sale? I need one asap what kinda condition is it in? How much you want for it posted ? Let me know
Steve
Hi mate has the head gone or is it still for sale let me know ASAP as I have cash waiting aslong as it's decent condition.
Thanks Jake.
just got the net back again! yes head still available jake and i have an alternator available poloeaton if your still interested?
The head has been removed from a working engine!
Sweet dude would you take £175 cash tomorrow as long as it's good condition and there aren't any cracks in between the valve seating and no play in the valve guides??
I'm only in south Wales so it wouldn't take me long to pop over to come and have a look if that's ok?
Jake
yes mate i would take £175! ill pm you my number!
got any other toothed pullies by any chance?
Still not taking offers on the manifold?
Manifold?
Hi do you still have this, what condition is it in,
Do you have any picture thanks
decided to sell a few more items original post updated! pictures coming tomorrow!
Oops, didn't notice you didn't want pm's till it was too late. Anyway, I'm interested in buying the block. I take it all pistons etc.. are included? is it damaged in any way?
I'm in Scotland, so would you be willing to knock a bit off the price if I were to arrange a courier?
Cheers.
Im after a loom if you still have yours knocking about.
hi mate do you still have the engine if so how much,many thanks craig
Still interested in the vernier pulley if you'll split it from the cam?
breadman the cam is still connected to the vernier you know of a easy way to remove it from the cam with out damage?
Boris £185 if you arrange courier for a quick sale. no damage was split from a working engine bottom end inc sump and oil pump, pistons the lot!
anythingvw i do still have a full working under 100k engine but will still hold on to this a little longer!
Mk1 Berg cup Arches £165
Would these fit a mk3 g40 or are the mk 1's different? Could you post them to the scottish highlands?
cheers Grant
mk1 polo's are different but mk1 arches can be made to fit and look nice. i can post to the highlands but will check price!
(http://i29.photobucket.com/albums/c293/eppofreak/polog40.jpg)
Yeah mate get me a price posted and i will get back to ya
cheers
Quote from: cheddarcheese on May 12, 2011, 08:42:36 PM
breadman the cam is still connected to the vernier you know of a easy way to remove it from the cam with out damage?
Probably the easiest way is to put an old cam belt around the pulley. Then hold the belt tight in a vice so it strangles the pulley and prevents it from turning. Now with a socket on the centre bolt give the wrench a sharp wack with a mallet - that should free it off.
What make is the vernier and how much you'd want for it posted to SM6? Could you send me a pic or two of it so I can see the condition first though before you start trying to remove it?
Cheers,
Richard.
Quote from: cheddarcheese on May 12, 2011, 08:42:36 PM
Boris £185 if you arrange courier for a quick sale. no damage was split from a working engine bottom end inc sump and oil pump, pistons the lot!
Done. Pm sent. :D
arches are £165 + £15 delivered to the highlands
Hi interested in the jabba sport charger what sort of mileage has it covered?
Many thanks
Chris
the charger i have no idea what mileage it has done at a guess about 100k but i dont think mileage is a big factor as i have had a charger that was on around 200k and no problems!
new pictures
Bottom end sold
I'll give you £30 posted for the clocks still
ok mate pm'd
hi did you sell the working bottom end.
how much 4 cat back system n where u location
cheddar 10mins south of bristol £275ono for the cat back system
updates
do you still have the ECU
not to hassle you mate - but can you send pics of the full blend when you get it from your mate please?
cheers
Pete
no worry s pete having issues with my camera atm so waiting for my mate to remember to bring his around mine!
ECU selling with engine!
any idea when i'll get the two remaining mounting brackets for the roll cage as you said you'd send them last monday ???
sorry buddy having issues with my grinder cheap shit buying a new one today will have them cut out and sent Monday. sorry for the delay