Club G40 Forum

Technical => Electrical => Topic started by: dub-disaster on February 20, 2011, 03:06:26 pm

Title: Dizzy position
Post by: dub-disaster on February 20, 2011, 03:06:26 pm

Stupidly before I stripped the motor and head I didn't mark the position of the dizzy on the head, I don't suppose any one has a picture of where it should be roughly to start with obviously I will time it up properley with a light just want a startig point if any one could ??
    Also I'm asuming lead order on the dizzy is 1342 starting with the one closet to the from of the car going clockwise ??
      Also I've changed my coil to the new 6n one, with regard to the earthing is it just the body that needs an earth strap on it onto the gearbox earthing point because I've forgotton how the earthing setup goes on the coil is it just a little forkshaped braket ??

Title: Re: Dizzy position
Post by: Jezza-7 on February 20, 2011, 11:06:29 pm

I can stop by tomorrow mate if needs be and you can take a look at everything you need?

Title: Re: Dizzy position
Post by: dub-disaster on February 21, 2011, 06:05:29 am

That would be very helpful mate I finish work at 2:00 pm so any time from then on realy mate would be great :)

Title: Re: Dizzy position
Post by: Jezza-7 on February 21, 2011, 12:46:07 pm

I will be round half 2 then. Im off work today.