hi considering breaking my 1991 polo g40 as its just blown a head gasket again.
just wanting to see what interest i would get in selling the car in parts...everything available pm me for details
where are you in the UK,
poss interested in the following
spacer that fits over the bolt on the alternator where it fits to the engine mount.
the bolt that goes through the alternator (to fit it to the engine mount)
2 bolts that hold the charger to the engine mount
head minus cam
induction kit
throttle body
metal pipe that runs on the back of the block
air aux valve - connects to the metal pipe on the back of the block
gearbox if it is an ATV
track control arms and steering arms - if VW and in good nick
im in southwest scotland and its not a atv gearbox sorry
no worries, post would be fine, i can arrange courier,
can you list any parts which are not standard, gives people a better idea of whats there and whats not, as we all know which parts are on a G as standard, its the wee mods that makes them all different,
cheers!
hi have you any interior parts for the car also i need a front metal filler strip that mounts under ther grill its colour coded and width of the car and less than an inch thick!
thanks mate
pm reply please
down pipe? possibly everything down pipe back.
im in desperate need of the plastic arch set and a few other bits oh and front and rear bumper
Id have the rubber interior door strips that go along bottom of window if there good
i am just testing water but if i decide to brake by end of week i will let you's all know.
its also just had a stage 2 charger rebuild at jabbasport 415 miles ago and charger is flowed to stage 4 :)
engine was rebuild 23k ago with forged internals
got the normal g interior but re trimmed in half leather
front mount intercooler
a lash of blue samco hosing for intercooler
(all receipts for all the work)
What suspension has it got?
only jom springs n shocks 30% uprated and lowered 25 mm ....basically brand new only covered about 1000 miles
i am in cumbria mate and could be interested in a few parts, well a mate of mine will be.
okay well what would he be looking for?
No worries. Im looking for a whole kit. Plus a box. Is it a GT box?
Got any pics of the bay?
Alloys?
yeah as far as i know its a gt box....does 112 flat out in fifth....gets my car from 0-60 in 6.2 secs :P
wheels are all straight and true but could do with a lick of paint as my guess is the previous owner never bothered his arse to ever clean the car :@ i think the are just bbs ra look alikes they are 14s sittin on 185 55 14 falken zeix ze912's all with loads of tread left(back are like brand new)
Ok, i wouldnt mind taking the rocker cover off you, plus if grunge doesnt take the throttle body off you i would like it.
how much would you want for the wheels and plastic arch kit mate
i also need
scuttle panel
glove box door
front and rear bumpers
centre console
drivers side door handle cheers mate
Hi,
I would take the inline fuel pump.
Scott
Hi mate,
I would be very interested in the engine from the below the head down if this is possible.
Please could you let me know and give me a price
Thanks Jake.
NOOOOOO! You can`t break that, it`s my fave colour G :o >:( :'(
would be iintrested in a few parts
airfilter kit
arch kit
strut brace
samco hoses
front windsceen.
have you a price for complete car
hi all after some long thinking i have decided i can not break my polo i get far to much joy out of driving it...so its away today to get more work done to it....sorry for anyone who was wanting parts....sooo please lock this thread. :)
thanks Alan
Good glad!
got the ecu?