Club G40 Forum

Technical => Superchargers / G-Lader => Topic started by: picklesg40 on December 16, 2010, 02:27:58 pm

Title: PSD Eaton Supercharger Pulley Dimensions
Post by: picklesg40 on December 16, 2010, 02:27:58 pm

hey guys

basicaly ive got near enough everything to finish my eaton conversion

bar the supercharger pulley, and a few other little bits

with the pulley being near impossible to get hold of, im going to have to get one made up, presumably CNC'd?

if anyone knows the dimensions and how many teeth etc these pulleys have id really appreciate them

also any other info on them too

cheers

Title: Re: PSD Eaton Supercharger Pulley Dimensions
Post by: poloeatonm45 on December 17, 2010, 10:59:41 am

psd made 2 types of pullys a 24 toothed one and another larger one but cant remember how many teeth it had. i have a 24 toothed one but its really worn so if you can find somewhere that will make you some i,ll take a couple from you as spares

steven

Title: Re: PSD Eaton Supercharger Pulley Dimensions
Post by: picklesg40 on December 17, 2010, 11:23:00 am

ok cool

so its 24 teeth

gathering its a 65mm pulley?

any one know how wide?

or any other dimensions

yeah ill see what i can do once ive got all the measurements etc, and what kind of price i could come up with

cheers

Title: Re: PSD Eaton Supercharger Pulley Dimensions
Post by: Justin14100 on December 17, 2010, 07:02:16 pm

I've been looking into replicating these for a while now the 24 tooth should have a 28 tooth alternator and a 48 tooth crank pulley

Title: Re: PSD Eaton Supercharger Pulley Dimensions
Post by: youngprodigys on December 17, 2010, 08:08:33 pm

PSD made 2 types - which are we talking about. the custom toothed pulley - or the one with the sleeved adapter to fit a standard eaton

Title: Re: PSD Eaton Supercharger Pulley Dimensions
Post by: poloeatonm45 on December 17, 2010, 09:54:59 pm

not sure really that is just what i,ve picked up reading the forum all i know is mine is the 24tooth one i think the belt is 20mm wide so the pully needsto be a lil wider, next time im at home i,ll measure the pully and getback too you. i would love a spare as mine is really worn and i really dont want to go back to ribbed belt set up as i had to run with it that tight the belt got hot and only lasted about 150 mile lol

steve

Title: Re: PSD Eaton Supercharger Pulley Dimensions
Post by: picklesg40 on December 17, 2010, 09:56:18 pm

im talking about the one with the sleeved adapter

ill also check the amount of teeth on my other pulleys

cheers

Title: Re: PSD Eaton Supercharger Pulley Dimensions
Post by: Oily Fingers on December 20, 2010, 08:44:01 pm

i have a psd pulley on my eaton project, i'm going down the unit tomorow, i'll take a few measurements and count whats whats for you.

Title: Re: PSD Eaton Supercharger Pulley Dimensions
Post by: PeteG40 on December 20, 2010, 08:58:18 pm

oily fingers - thats a custom one.

PSD eaton chargers are shorter.

Oh and they ahve a key way made in the shaft too - which normal eatons dont

Title: Re: PSD Eaton Supercharger Pulley Dimensions
Post by: poloeatonm45 on December 23, 2010, 02:54:21 pm

ah thats right pete my pully does have a key way infact was it you i bought my worn one off?

Title: Re: PSD Eaton Supercharger Pulley Dimensions
Post by: Oily Fingers on December 23, 2010, 10:20:58 pm

Quote from: PeteG40 on December 20, 2010, 08:58:18 pm

oily fingers - thats a custom one.

PSD eaton chargers are shorter.

Oh and they ahve a key way made in the shaft too - which normal eatons dont

hahaah good point.