hay all i have a polo 6n G40 running an eaton m45 charger and a large front mount intercooler, but im have a fair bit of belt slip....
is there a toothed belt kit out there for me??
im also after an ECU chip for the eaton or will i need a full remap??
im after doing some more mods but im not sure whats the best thing to do could you help lol
iv been told G60 injectors, a 4 branch, toothed belt kit, camshaft ( unsure what one ) and the a chip ( remap )
dose that sound bout right?
thanks for your help ;D
http://www.polog40.co.uk/forum/index.php/topic,5532.0.html
This guy sells almost everything you need...
Quote from: Alexiskayak_7 on November 03, 2010, 11:00:06 AM
http://www.polog40.co.uk/forum/index.php/topic,5532.0.html
This guy sells almost everything you need...
Thanks mate iv replied to his post... Are there any supplilyers out there if it's sold or he Wobt split it??
Quote from: dani1326 on November 02, 2010, 11:16:13 PM
hay all i have a polo 6n G40 running an eaton m45 charger and a large front mount intercooler, but im have a fair bit of belt slip....
is there a toothed belt kit out there for me??
im also after an ECU chip for the eaton or will i need a full remap??
im after doing some more mods but im not sure whats the best thing to do could you help lol
iv been told G60 injectors, a 4 branch, toothed belt kit, camshaft ( unsure what one ) and the a chip ( remap )
dose that sound bout right?
thanks for your help ;D
You got sam evans car then? knew him from colchester (a little). Should be a good strong engine that!
Speak to PoloPP (yoof from here) apart from the cam and the toothies he should be able to sort you out with the rest - premium stuff!
But hows the car? i only once got to have a little thrash against him with my G40 - had to lift off a couple of times not to get too close though ;)
Quote from: Justin14100 on November 03, 2010, 02:39:52 PM
Quote from: dani1326 on November 02, 2010, 11:16:13 PM
hay all i have a polo 6n G40 running an eaton m45 charger and a large front mount intercooler, but im have a fair bit of belt slip....
is there a toothed belt kit out there for me??
im also after an ECU chip for the eaton or will i need a full remap??
im after doing some more mods but im not sure whats the best thing to do could you help lol
iv been told G60 injectors, a 4 branch, toothed belt kit, camshaft ( unsure what one ) and the a chip ( remap )
dose that sound bout right?
thanks for your help ;D
You got sam evans car then? knew him from colchester (a little). Should be a good strong engine that!
Speak to PoloPP (yoof from here) apart from the cam and the toothies he should be able to sort you out with the rest - premium stuff!
But hows the car? i only once got to have a little thrash against him with my G40 - had to lift off a couple of times not to get too close though ;)
yes mate i have :) iv got a few plans for you you will all love watch this space
its a FANTASTIC CAR hes built one hell of a motor
so will polopp beable to sort me out with a chip for my application? and the injectors??
You can run PSD toothed pullies although you'll need an eaton specific pulley
Quote from: vwmk3jon on November 03, 2010, 09:57:57 PM
You can run PSD toothed pullies although you'll need an eaton specific pulley
thats whats proving hard to find..... :/ hmmmm
im running an eaton kit on my g40 and im in the market for a new toothd charger pully too as mines very worn now. let me know if you find any mine is a 24 tooth charger pully
steve
if i was told right, there was 2 different spec eaton pulleys. One had 24 teeth, the other had afew more (number escapes me!)
If i can find someone local to me who can make up a new pulley, i'll have a couple made as mines abit worn now too ;)
Quote from: vwmk3jon on November 05, 2010, 11:19:16 AM
if i was told right, there was 2 different spec eaton pulleys. One had 24 teeth, the other had afew more (number escapes me!)
If i can find someone local to me who can make up a new pulley, i'll have a couple made as mines abit worn now too ;)
if you can get some eaton ones made up i can get the crank and alternator toothed pullys so thats a full kit :)
if you get anywere with the charger pullys let me know cause i would love to have a new on or even a couple for spare
steven
i also need a charger pulley, managed to source a PSD kit but without one
wouldnt mind having a spare either
I need to swing by afew places locally and see what they say but ideally i'd need to have the pulley off the charger which is abit difficult as i need the car daily.
If anyone else finds anywhere that can make afew pulleys up, let me know as i dont mind passing the relevant details onto them ;)