Got 7 of these in stock currently.
£200 + £15p&p
Cheers
Pete
Just had another batch of these- 6 in stock :)
Cheers
Pete
Hello Yoof!
I am interested in a subframe. Could I see how this is stage 2?
Thank you!
Hmm, very tempted by one of these. Shame it's car insurance month.
Might relieve you of one at the beginning of May though.
Got 6 coming in within the next few weeks, I'll post up here when I pick them up :)
Alex- No problem, you got ARB blocks already?
I do. I quite fancy one of the new frames with the ARB retained but I'd rather get this one for now and enjoy some of the benefits. I'm thinking I might go down a notch on my front spring poundage to put a bit of ride quality back in. Trouble is with no ARB I'm worried I'll be rolling about.
But then I also want a set of your TCAs which I assume you need a stage 3 for?
Erm- Ideally yes, as when dialing in any camber (making TCA longer) you're also dialing in more castor angle by default, so need to make the compression strut longer too, in order to retain the original castor angle with an increase in camber.
Unfortunately on a stock setup you obviously can't do this (you could space the ARB- but I doubt you'd get much real world adjustment, and it's a PITA).
So to answer- yes it can be done on a stage 2, but castor correction is limited by stock ARB.
Also worth mentioning that on a stock ARB setup with aftermarket ARB blocks you're unlikely to be wanting to dial-in huge amounts of camber. So as long as your aim is just to ensure geometry is to standard spec then they should work fine.
Would have any problem with send to Mallorca?
Cool, I thought that might be the case. I'm still thinking I'll go for one of these for now, then upgrade when money allows. There'll always be a market for these second hand.
Any idea on how long till a batch are done ;D
In stock now 8)
What tube are these made from?
Round stuff. :D
CDS mate.
Diameter?
You buying one or making your own?
Well basically, I need to make a frame to hold a Sump guard, I have already a length of 25 od cds, and got a pair of compression struts of a mk2 escort friend and im seeing if i can adapt a stage 2 frame as it would be a lot easier than making one.
By the way, i found the fia Number on that cage, it was under a load of weld!
I'd not reccomend compression struts on anything less than a stage 3 frame. 25mm OD feels a little small, especially for a rally car.
Do you still have any Stage 2 frames in stock? With the ARB blocks?
Replied to you e-mail this morning, but for everyone's benefit, yes- everyhting (subframe and bushes wise) currently in stock.
Cheers
Pete
Whats the ground clearance like on these, out of interest?
Just one of my polo's is fairly low and i want to be able to drive it over the unmade road down here!!!
Yoof, you got any frames in stock now?
got some money going in my account tuesday so want to order one :) be payingvby bank transfer if thats ok?
Hi sent you an email last week
thought id message you on here
any chance of getting a stage 2?
appreciate your really busy with lots of other stuff :)
thanks for your time
We have stock, but Yoof's literally just moved house over the last few days along with the frames etc. Could you bear with us for a week or so 'til he gets unpacked please?
I have snail pace internet through my phone- no stage 2 currently in stock Taylor, will re-order from supplier this week and let you know when they're in.
Have 1 stage 3 frame left in stock.
Cheers
Pete
No worries :)
thats fine, i know your both busy at the present and have no problem waiting
would prefer stage 2 over 3 as mines a daily and stage 3 might be too harsh as id need to run coilovers to compensate no arb
thanks
Hi do you still have frames
Currently doing a group buy for our French Polo friends, once this has been shipped we'll get some more stock :)
Cheers
Pete
I'll have one off you when they come back in ;D
so will i let me no when you have in
Any of these in stock? If so I want one :)
do you still have any left? also are they an easy fit...... ie any mods needed? thanks
Fresh stock end of this month ;D
No mods required, just the nylon ARB blocks we also sell.
Cheers
Pete
Got any in stock?
Im going to say this here.
Its rare you get a product thats 'bolt on' that really fits. But this ACTUALLY does fit and work.
Thanks Matt- Appreciate it :)
Collecting 6 stage 2 frames on the 10th May (3 of these have been paid for already) so will have a stock of 3 mid May.
Many Thanks,
Peter
I'll have one! :)
Me too, can you pm your bank details over, Ta
I have one
pete have you got any stage two frames in stock? ??
cheers
Not currently, but should have end of July/start of August.
Cheers
Pete
Would also like a stage 2 subframe. Do you have an actual date for when the stock is due?
Thanks
Joe
I'm also interested, is the end of the month a confirmed delivery date?
No confirmed delivery date yet- I'll let you know when they're back in stock :)
Pete
hi mate can you let me know when you get them too please thanks
Collecting this weekend, please e-mail: enquiries@poloperformanceparts.co.uk to place an order.
Thanks,
Pete
Got any of these knocking about at the moment. Got the funds ready to go