hi guys. my knock sensor is leaking oil and i was wondering has any one had this problem before? or can any one point me in the right direction to fix it? im hoping its not exessive crank case pressure or anything like that! ive done a search on here but havnt found a topic about a knock sensor leaking ???
any help would be appreciated.
thanks Luke
Sounds very weird. Surely the knock sensor mount doesn't enter any oilways...? Is it a G40 block? Perhaps the oil is leaking from higher up but collecting on knock sensor?
i hope its a g40 block i would be peeved if it wasnt! The knock sensor does enter a ridge on the block i dont know if this is a oil channel or just block strengthing? I have had a look above the sensor and i cant figure out where it could be comming from above. the charger wasnt leaking and the only other thing i could think about was where the water pump is but the it would be coolent leaking not oil and i dont see how it could collect on the knock sensor :-\
check its not the iSV above it.
where is the isv situated on the block? has anyone got any diagrams or pics of where it should be? I cant see it on my block ??? the only thing I can see above my knock sensor is the alternator!
Thanks for the help
The knock sensor is on the back (inlet) side of the engine. The alternator is on the front (exhaust) side of the engine. The ISV is bolted onto the waterpipe from the water pump on the back of the block. From your description it doesn't sound like it's your knock sensor that's leaking..? Perhaps a gauge sender or something... do you have a pic?
sounds to me its the charger oil feed bolt thats goes into the block.
Quote from: Daryl on July 09, 2010, 06:17:44 AM
sounds to me its the charger oil feed bolt thats goes into the block.
totally agree - thats the only bolt under the alternator - oil drain bolt. they have two copper washers either side of a banjo bolt
aha thatl proboly be it then. I just naturally assumed it would be the knock sensor ::) so i just need to get some copper washers the correct size and hopfully problem fixed 8)
Many thanks for the help guys