Club G40 Forum

Technical => Superchargers / G-Lader => Topic started by: sohailG40 on May 29, 2010, 11:25:27 PM

Title: fresh charger build problems
Post by: sohailG40 on May 29, 2010, 11:25:27 PM
ok guys i just put the charger back on the car bit of a problem

idle very smooth but as soon as i get up to 3000 reves just before changing gear it get this nasty nosie like a bearing running with out the oil like a metal on metal nosie is this normal un till you runn it in or is some thing fucked and should i send it back

please all the help you guyz can give would be very gd

thanks for your time
sohailG40
Title: Re: fresh charger build problems
Post by: cheddarcheese on May 29, 2010, 11:30:05 PM
you say new as in new charger 0 miles or a fresh rebuilt charger?
Title: Re: fresh charger build problems
Post by: sohailG40 on May 29, 2010, 11:31:34 PM
no sorry its just come back from g werks after a full service


went in fine to them but when i got it back it sounds bad >:(
Title: Re: fresh charger build problems
Post by: Daryl on May 30, 2010, 12:48:03 PM
Did they clean it? If they did i would send it back to have the bearings replaced same thing happend to a friend with his g60 charger. I will drop you a pm later to let you know the full story of it. All the crap they blasted his with got everywhere.
Title: Re: fresh charger build problems
Post by: sohailG40 on May 31, 2010, 12:05:26 PM
yeh they gave it a good clean dose that mean they might have left some bits of sand in there when they finished the sand blasting maybe i dont no

ill call them and see what they say tomarrow

thanks for your reply mate that was very helpful and i will look forward of reading the PM

thanks

sohailG40