Uprated Driveshaft group buy is on May 2010!
In a nut shell if you have an LSD or a powerful car that runs decent tyres on an open diff you'll certainly benefit from one of these. I've been running once since 2001 and never had any issues.
I would need to purchase in batches to 10x to get the advertised price rightso the more merrier , no profit will be made from these at all.
We need 10+ commited people for this group buy to happen.
---------------------------------------------------------------------------
1x Bare (Drivers side) offside uprated driveshaft
Turned from a single piece of steel and heat treated, all the work is carried out by professionals in the trade and holds a material manufactures defect guarantee.
2010 Prices: £145 inc 20% VAT + £10 Postage and Packing
Slight increase over last year price due to increased VAT and raw materials
Over 9+ years of production - with zero failures, Track and Road proven.
I'd like to stress that NO profit is being made from this group buy. To buy these individually cost at least double the amount.
This is a one off group buy Quantity of 10+ are required before we can achieve this price. If we cannot achieve 10+ orders I will offer a full refund to everybody who has paid.
Lead time: Minimum of 6 weeks from order date. (usualally up to 12)
The Group buy will close on July 1st 2011 so that gives people plenty of time to put aside some money (2 pay days away.)
The driveshaft is proving difficult to come by and with the increasing manufacturing costs these will only become more expensive as time passes so get one now while you can!
(http://farm4.static.flickr.com/3200/3281089758_5d3ef82f04_o.jpg)
Payments accepted are: Bank transfers, cash or cheque , PayPal can be accepted but please allow an additional 3.4% + 20 pence on the total for the associated PayPal fee( unless you send as a gift ) .
To secure a driveshaft please PM me , I will then supply you with the credentials to make the payment. I will then add you to the list .
I've enclosed a PDF file which is displayed below for more information. ( you can only see this if you log in
I understand that there are many people "interested" in a the driveshaft , however if you definately want one I'll add you name my orginal post after payment has been made, this way we will know for certain if we have enough paid buyers by the cut off date. It just sorts the people out who are "interested" and 100% commited.
If you are ready to pay please PM me and I will send you the details and once comfirmed cleared i'll add you to the master list.
Details of the previous group buy: http://www.polog40.co.uk/forum/index.php/topic,1379.0.html (http://www.polog40.co.uk/forum/index.php/topic,1379.0.html)
Regards
Karl
Paid members:
Put my name down I'd be up for some is it justyhe longer one that needs uprating I'd assume ?
Quote from: dub-disaster on May 14, 2010, 11:59:51 PM
Put my name down I'd be up for some is it justyhe longer one that needs uprating I'd assume ?
Yes just the long one.
I will have one.
Daryl
When would you require payment by?
yeah im well interested! keep me updated please!!
cheers
Ross
i want one, count me in.
I'll have one please
any adventages over a german diesel shaft? i got one of these for a bargain £25 and it had a much meater end on it - not just the shaft thickness
I've just secured a price based on a min order ;D , I'll update this page this evening with the details
Quote from: youngprodigys on May 17, 2010, 08:05:19 PM
any adventages over a german diesel shaft? i got one of these for a bargain £25 and it had a much meater end on it - not just the shaft thickness
Some foul the block and chassis on lowered cars. The diesel shaft as far as I'm aware is hollow, Speaking to the driveshaft specialist a solid bar made out of the right material will offer additional strength.
the diesel shaft I used to have, while most of it was thicker, still went too thin near the CV joint splines and still had a undercut radius here which is the weak point. Plus it caught on my chassis and even engine block when 60mm low (albeit only really on track days when I had a poor suspension setup with too much body-roll).
count me in
Quote from: dub-disaster on May 14, 2010, 11:59:51 PM
Put my name down I'd be up for some is it justyhe longer one that needs uprating I'd assume ?
Hi Yes its just the long one
Quote from: NeilG40 on May 15, 2010, 09:04:57 AM
When would you require payment by?
Hi 1st June 2010 is the deadline
Thanks
Steve , Liam and Ross , I've updated the post with more info..
Ok I'm 100% in I'll pay on pay day 24th for me :) if that's ok
whats the payment? 140ish? and we have untill the 1st of june? yeah?
Quote from: g40Ross on May 18, 2010, 09:01:16 PM
whats the payment? 140ish? and we have untill the 1st of june? yeah?
2010 Prices: £136.50 inc VAT + £9 Postage and Packing , 1st July is the deadline
Sorry , I just realised I put the wrong date in for this group buy , the deadline is 1st July 2010 , so the buy is open for another month!
i may be in for this aswell now - just found out what hayesey was saying was correct - my diesel shaft fouls the block - going to take the angle grinder to it as its a none important bit - but i will find out soon enough if it works....damn air ride:-(
Any more takers on these? Once the the group buy closes thats it!
You can put my name down.
sorry guys ive got to pull out of the group buy my daily needs work for mot :'(
ive sorted my problem with my clearance now - never anything an angle grinder wont fix eh!
BUT - my next project for this car is the engine and when you take into account how crazy my car is - it aint going to be slow. so i will jump in on the group buy and store the shaft for when its needed.
forward think dont you think Karlos.
Is this still going ahed is there enough people to to get a batch made up ?? As I'm ready to pay now but not sure if it still going ahed.
Hi I only have 1x fully paid and 1x pending payment at the moment , there is still time please PM me and I'll send you payment details
Regards
Karl
Have pm'd you jst wondering if this will go ahed no matter what number of units you sell if so I'll pay now but if the minimuim order isn't met then i wont bother please let me know soon thanks
Hi I've got 2x paid members with another 2 pending payment , so we need another 6 before this can go ahead . i'll give it an extra few days and see if any more people jon the group buy.
Regards
Karl
Hi I'm afraid the interest is low this time around,
I'm happy to hold on to see if we have any more takers, however I'm conscious that I'm receipt of payments.
I have 2 paid members so far I'll hold this buy open until Friday. If we do not get the numbers I will issue a full refund to those who have paid.
Regards
Karl
If the full number of ten is t achived (wich at the moment it doesn't look like it's going to be ) could you get a price for a lower batch or even a 1 of please as I'd realy like to get one of these. Or is there a minium batch of ten from the manufacturer
I'll find out and let you know
Hi I'm afraid the company will not offer the low rate on single orders i'm afraid
Ok thanks for trying mate ill try n get one sowhere else or just leave standard ones in
i just sleaved mine mate, i done it thinkin there was non of the uprated ones left. worth a go.
Where'd u get it sleeved how much did it cost mate ?
I'll try and get thr group buy going again in a few months .
Cool. I missed this one, but if and when you do restart this, then count me in!
i was supposed to be in on this one but got hit with some massive bills.
i still deffo want one so put my name down on the next one please.
I'll be in for new one :)
I'm interrested in a uprated driveshaft. Isn't it possible to make both driveshafts uprated (left and right)?
Friendly regards
I can potentially fire this off again if there is enough interest?
do it !!! ;D
I'm up for it
I'll take one for sure!!!
So is that 4 for definante we just need one more ?
i`m up for one,
lets get it on!
Great been after one of these for a while now.
ok then, let's start...
If your names down for sure then copy and paste this list and add your name
Dub-disaster
Dub-disaster
Etches
Dub-disaster
Etches
ADUS2
Dub-disaster
Etches
ADUS2
iloveboost
Dub-disaster
Etches
ADUS2
iloveboost
G40_Jez
Fantasitc! any more takers?
ill ask my mate he might want one for his mk1, how much again?
£145.50 Inc postage
Quote from: Karlos the jackyl on September 28, 2010, 07:06:09 PM
Fantasitc! any more takers?
Haven't got a choice now do I.....I'll take one
karlos do you fancy setting a closing date for this group buy so we know when last orders are ? im ready to pay now if you want me to
Sure , I'll update this on the weekend with a new date. and bring this groupbuy back to life
Any news on this yet ??
Was just about to ask the same question!
is this going to happen or not ?
still no news on this then :o
quick!!
http://www.clubpolo.co.uk/forum/index.php?showtopic=217364 (http://www.clubpolo.co.uk/forum/index.php?showtopic=217364)
One step ahed, already bought you can take my name of any potential group buy I've finaly got one :)
Is this groupbuy ended?
Come on ppl let's get this beaut runnin!! Whos interested!!?
no one interested before the VAT goes up?
I'am still interrested...
and me for sure, im getting my lsd in the new year so count me in..
i want 1 how will it beneft is this diffficult to fit
Are these still available or is this section dead now
Still interested...
These can be made available again , however I invisage a price rise due to VAT increase and cost of materials since the last buy. I will look at prices after the bank holiday and post on here.
Spoke to the supplier today , good news is they can still make them , the price they loosely quoted is slightly higher than last year however I'm hoping to get a concrete answer tomm.
Watch this space..
Gave the supplier a nudge this morning , hope to have an answer by the end of today re prices
New prices updated :)
please see the new thread in the Group Buy section for this now:
http://www.polog40.co.uk/forum/index.php/topic,6670.0.html