For Sale is a complete VW Polo MK1, MK2 , MK3 16v Exhaust Manifold and System
(http://farm5.static.flickr.com/4044/4372633751_b8c2be15cf.jpg)
This is a custom build and not an off the shelf item
The Manifold :
Is a fully hand built TIG welded stainless 4-2-1 manifold designed for a high torque spread accross the rev range.
(http://farm3.static.flickr.com/2232/4372567355_9c20f3c7d9.jpg)
The manifold is designed to fit the 16v AFH engine into a MK1 , MK2 , MK3 conversion.
Provision has also been made in the design to accomodate a G40/G60 Supercharger if are crazy for power!
(http://farm5.static.flickr.com/4017/4373330100_a7e442a903.jpg)
(http://farm5.static.flickr.com/4011/4372587811_f66f716e43.jpg)
This alone cost me over £500 + VAT and has covered 1500 miles maxmum from new.
The Exhaust system:
Is a powerflow 2.25 inch stainless steel system with a 2.5 inch bore tailpipe
This has a slim middle silencer and a large back box.. the sound this makes is awesome, not boomy by any means , it sounds very conservative but indicates aggression!
This cost me £330
Again ths has covered 1500 max however it requires an exhaust hanger to be re welded on the backbox.(http://farm3.static.flickr.com/2721/4373323310_df7bc80ff9.jpg)
Otherwise in great shape.
Obviously both exhaust and manifold are paired up , but these can be seperated and sold individually.
So £350 ono takes both . as i need he space. bargin for somebody
How much for just the manifold?
Will take offers on this little lot.. needs to go
so will it fit a g40?
The system will fit a G40 but will require a smaller flexy head or a step down converter.
The manifold is 16v specific.
system had been sold , The manifold is still available..
Make me an offer I cannot refuse!
Both sold