Club G40 Forum

Technical => Superchargers / G-Lader => Topic started by: TDK on December 01, 2009, 08:46:49 PM

Title: G-lader hose - OEM dealer can't find it in ETKA
Post by: TDK on December 01, 2009, 08:46:49 PM
Hey guys.
my car is in the garage for a little rest (that's what I'm hoping anyway... :-\)

I found a hole in one of the 3 (!) hoses that goes from the G-lader.
I've attached a pic below (if it works)
(http://img205.imagevenue.com/loc418/th_99496_polog40_122_418lo.jpg) (http://img205.imagevenue.com/img.php?image=99496_polog40_122_418lo.jpg)

It's the hose with the gray duc tape on it.

What is it for first of ? Remember reading something about the G-lader being oiled with engine oil - is it via this...


QUESTION - is it unusual to have this hose seperate ??? I ask because the parts guy I talked to showed me a picture with only 2 hoses see below...

(http://img254.imagevenue.com/loc126/th_00747_etka_example_g40_122_126lo.jpg) (http://img254.imagevenue.com/img.php?image=00747_etka_example_g40_122_126lo.jpg)

where one goes in two directions...

How does this system work - I would really like to know (by you, or links) please.
Title: Re: G-lader hose - OEM dealer can't find it in ETKA
Post by: Shailan on December 01, 2009, 09:57:07 PM
The hose is the return feed of air back to the charger. When the throttle closes the un needed air re-circs back to the charger.
A lot of ppl on the forum remove this, however you will need to blank off the feed to the charger.

You can also fit 2 inductions however you will need another charger sleeve.

I am sure you will find ppl on the forum willing to sell their pipes where they are not using them.
Title: Re: G-lader hose - OEM dealer can't find it in ETKA
Post by: Nick_S on December 01, 2009, 10:31:17 PM
You have a 1992 type supercharger fitted to your mk2 polo G40. The original mk2 supercharger on yours with the 'Y' pipe must have been removed by a previous owner to you.

I have a spare section of pipe that you need :)
Title: Re: G-lader hose - OEM dealer can't find it in ETKA
Post by: TDK on December 02, 2009, 03:43:38 PM
 :) Super info!

I took the info to the VW dealership and the guy found it - ordered it home for me. Should be around £43 GBP (I'm guessing our massive Danish  taxes are included)

Gratefull for the offer Nick_S  :)
Title: Re: G-lader hose - OEM dealer can't find it in ETKA
Post by: TDK on December 02, 2009, 08:07:16 PM
I'll keep you guys posted.
whether I'm right or wrong about that price :)
Title: Re: G-lader hose - OEM dealer can't find it in ETKA
Post by: johnfb55 on December 11, 2009, 07:13:25 PM
i have a orignal return feed used but fine. i would sell just make me a offer if you still need one.
Title: Re: G-lader hose - OEM dealer can't find it in ETKA
Post by: TDK on December 12, 2009, 05:03:41 PM
Hi guys

Thankyou for the offer johnfb 55 but I was in luck buying a new one. :)
I gave dkr 326,25 which is about £40/€44. taxes included.
there's parts# 871 145 989 on the invoice.