Hi there,
Wondering if anyone can help me please seeing as my engine is not running :D.
Can anyone tell me the oil pressure of their G engine.
What i need is a exact reading of someones oil pressure at a specific rpm and oil temp if that is possible.
For example - 1 bar @ 2000rpm @ 80degC
I know this is abig ask but would be a massive help if someone could help me out with this.
Thanks for your time.
Jez
I dont really know much yet!! about these motors. but mine runs sort of similar when at that temp.
From cold around 6-7 bar then when running hot 1bar
Quote from: Rae on December 01, 2009, 10:50:22 AM
spec is in the haynes... is it not?
Didnt think of that Rae i'll have to have a look see - cheers :). Always good to get a real time check aswell though if possible.
(Thanks for that rich_G40)
Anyone else got any other results? The turbo guys especially!!??
Thanks again
Quote from: Rich_G40 on November 30, 2009, 08:02:23 PM
I dont really know much yet!! about these motors. but mine runs sort of similar when at that temp.
From cold around 6-7 bar then when running hot 1bar
ditto
Quote from: Rae on December 01, 2009, 01:43:14 PM
sounds about right,
isn't it something like 2bar at 2000rpm and then "1bar for every 1000rpm" after that?
Lol, not quite. That would mean 6 bar oil pressure at 6k :D
Jez- 950rpm 75'C Gallery temp, Approx 1.2Bar Pressure
I think from memory the PRV in the pump is 3.5Bar, but it's a while since I've driven mine to be honest....
Thanks Rae and Yoof. Just the info needed for Pace products!
Dry Sump?
;)
My brother is designing a G40 kit using some pace parts for his final year project. If it goes ok and seems 'do'able then we'll have a crack at it on ours. Not till late 2010 though-if at all!!