Club G40 Forum

Technical => Engine and Transmission => Topic started by: Jezza-7 on November 01, 2009, 08:58:01 PM

Title: G60 injectors
Post by: Jezza-7 on November 01, 2009, 08:58:01 PM
Know someone is selling them but not sure what cc they are.

He gave me some numbers i think a part number maybe

b26070717371 on the injector body and 944 on the green plastic.

He siad there are mk2 golf g60 injectors. Are they the same?
Title: Re: G60 injectors
Post by: hayesey on November 01, 2009, 09:11:17 PM
all the Bosch part codes are here:

http://www.polog40.co.uk/article_injector_table.php
Title: Re: G60 injectors
Post by: Jezza-7 on November 02, 2009, 12:22:25 PM
Ok thanks. Cant find the right part number to match but the 944 number does match with the stock G60 green, says:

0280150944      200cc/min @3bar    14.5 Resistance (ohm)

What injectors are standard G40 ones then?

Would they be any good?
Title: Re: G60 injectors
Post by: hayesey on November 02, 2009, 12:26:05 PM
standard ones are about 190cc
Title: Re: G60 injectors
Post by: Jezza-7 on November 02, 2009, 04:18:46 PM
Oh so there is not much point of buying these then.

Take a look and see what you think.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=220503439686&ssPageName=STRK:MEWAX:IT

Title: Re: G60 injectors
Post by: hayesey on November 02, 2009, 04:42:31 PM
not too sure what you're asking, G60 "greens" should have the bosch part code 0280150905 on them.

Title: Re: G60 injectors
Post by: Jezza-7 on November 02, 2009, 04:53:40 PM
But the ones on ebay are from a golf G60, whether there any different?

The number he gave me (b26070717371) doesnt match up with the bosch list you posted.
Title: Re: G60 injectors
Post by: hayesey on November 02, 2009, 05:06:28 PM
no that's not a bosch part code, he says they are from a G60 Limited (i.e. a very rare 16v G60) so not sure if they'll be the usual 250cc flow rate as normal 8v Golf/Corrado/Passat G60s.
Title: Re: G60 injectors
Post by: Jezza-7 on November 02, 2009, 05:08:54 PM
Ah i see what you mean. I have contacted him again to see if he can find a part number like the one for the Stock injectors.

Will see what he comes up with.
Title: Re: G60 injectors
Post by: Jezza-7 on November 04, 2009, 03:54:12 PM
Herd back from him and he said:

i know what you mean about the part no. but these have no bosch no. like that, they are motorsport factory specials so thats all i can tell you. these are the genuine injectors from the 16v g60


Any ideas ?
Title: Re: G60 injectors
Post by: hayesey on November 04, 2009, 05:17:03 PM
if he can't tell you he flow rates of them then they are pretty useless.  Unless you take a gamble and then send them to an injector cleaner (ask Yoof) who will flow test them for you at the same time as cleaning them.

I don't really see why Bosch wouldn't put part codes on injectors though or why a 16v G60 required some kind of specially made injectors and not any off the shelf parts.
Title: Re: G60 injectors
Post by: Jezza-7 on November 04, 2009, 05:30:33 PM
Yeah i know. Might wait till very last minute to see what they go for and think about it.