Print Page - First mods??

Title: First mods??
Post by: soggy1 on October 14, 2009, 03:36:38 PM

Wanted to know peoples opinions on the 1st modifications to make on a G40.
I am looking to get 150hp, what would be your suggestions?

Title: Re: First mods??
Post by: PeteG40 on October 14, 2009, 03:45:10 PM

service charger if not proof/not 100% - get it ported

chip and pulley

gt inlet manifold

decent exhaust system+ decat

derestricted airbox or cone filter

Title: Re: First mods??
Post by: wozzaG40 on October 14, 2009, 05:13:27 PM

an easy 1.5k spent there if you get a good exhaust system and tooties aswell!

Might as well de-wedge the throttle body while you at it.

Title: Re: First mods??
Post by: scotsjohn on October 14, 2009, 06:30:52 PM

Big brakes, subframe then feed the horses.

Title: Re: First mods??
Post by: soggy1 on October 14, 2009, 08:00:08 PM

I have already upgraded my brakes to a 256mm conversion, also it has a R1 charger which was serviced 9000 miles ago and a dewedged throttle i am currently purchasing a 65mm pulley and a chip to suit.

Title: Re: First mods??
Post by: wozzaG40 on October 15, 2009, 10:45:06 AM

Induction kit, Exhaust/4 branch and gt inlet if you must.

Then theres injectors, shrink cam and so on.........

Title: Re: First mods??
Post by: soggy1 on October 15, 2009, 12:02:57 PM

Thanks for the advice.
Got plently of time to do it all, as i plan to have the G for many years! Going to try and get a good amount of work done over the winter.

Club G40 Forum

Club G40 => General Car Chat => Topic started by: soggy1 on October 14, 2009, 03:36:38 PM