For sale an original cup car gearbox with Gemini Diff.
The box was rebuilt about 2-3k ago (unfortuantely i dont have a receipt for this). It has however just come back from a strip down an check by JP Race in Silverstone (which i do have a receipt for). They confirmed everything is fine inside and no rebuild was necessary, although one seal was replaced as it was damaged during removal. During the check I had a speedo take off gear installed/replaced as the race boxes didnt have or need these.
The price is £850
and would ideally be collection from Silverstone Northamptonshire
(http://i23.photobucket.com/albums/b393/kustompolo/IMG_2259.jpg)
(http://i23.photobucket.com/albums/b393/kustompolo/IMG_2258.jpg)
Cheers
Matt
BUMP
Hi
Are the ratios the same on the cup box and what type of diff did they fit to them were they helical or plate?
If plate how harsh were they 0.5, 1, 1.5 or 2 way.
Dunx
gearbox internals on cup car boxes are identical to g40 road car boxes. The gemini is a plate diff, preload and ramp angles could be set to anything, depends how the driver liked it setup. I never knew the specs of the gemini I had, it didn't seem any harsher than the gripper diff I have now, possibly a touch less so if anything.
Thanks for the reply Hayesey. I dont know the exact spec either all I can say is it wasnt difficult to drive in normal traffic. It did the job in the corners though provided you dont lift off.
Cheers
Matt
Preload prob circa 110lb- if that helps anyone.
Looks like a Phase 1 diff too
Back up for sale as the Guy who said hed have it isnt responding to emails.
BTTT
This is still for sale, offers via pm please