Print Page - Thermostat housing

Title: Thermostat housing
Post by: markh450 on July 23, 2009, 10:57:54 PM

hi all

my thermostat housing is weeping a little bit from the seal where it bolts to the head. I want to replace it before it gets any worse but can't seem to find any thermostat housings for G40's anywhere??

GSF lists 2 below:

17951A THERMOSTAT HOUSING PO 1.05-1.3 90>94 16.00
17951D THERMOSTAT HOUSING PO 91>94 (Ex. 1.05 / 1.3 SPi) 16.00

are either of these ok?

Title: Re: Thermostat housing
Post by: PeteG40 on July 23, 2009, 11:16:16 PM

bottom one, - it says not for spi - which means mpi.. remember to get the bolts for it too

Title: Re: Thermostat housing
Post by: markh450 on July 24, 2009, 09:36:54 AM

Thanks for that! the bloke in GSF said they didn't have one for the G40!

Club G40 Forum

Technical => Engine and Transmission => Topic started by: markh450 on July 23, 2009, 10:57:54 PM