Text only | Text with Images

Club G40 Forum

Technical => Engine and Transmission => Topic started by: GTG40 on March 31, 2009, 09:49:40 AM

Title: psd turbo cam setup
Post by: GTG40 on March 31, 2009, 09:49:40 AM
alright guys
Just got a PSD turbo cam and put it in my g40. Do I need an adjustable pully to set it up properly? or do i just need to adjust the ignition timing? as its running a bit lumpy compared to the stadard cam and ticking over when cold at 1300rpm then won't idle when warm.

thanks
steven
Title: Re: psd turbo cam setup
Post by: hayesey on March 31, 2009, 11:24:04 AM
yeah you do need a vernier pulley to get it setup exactly right.  It should still run without one though.

Is your ignition timing set right?
Title: Re: psd turbo cam setup
Post by: GTG40 on April 10, 2009, 07:05:48 PM
Does any one know what degrees full lift on cyclinder 1 inlet should be set at on the crank for the PSD or schrick turbo cams?
Just trying to time mine up

Thanks
Text only | Text with Images