Club G40 Forum

Technical => Engine and Transmission => Topic started by: SuperMario on March 17, 2009, 07:52:34 PM

Title: De-cat
Post by: SuperMario on March 17, 2009, 07:52:34 PM
am i right in thinking the law on cats is 1992 ?

Was considering putting in a decat pipe,  but whats to do with the lamba? if i weld a bolt on the decat will that work? i assume taking it out completely could mess up the mixture ratio?
Title: Re: De-cat
Post by: Nick_S on March 17, 2009, 08:01:36 PM
Yep its August 1992, so basically any cars from K-reg and newer have to be fitted with a cat. Thats's all VW have done with their decat pipe is weld a nut into for holding the lambda probe.
Title: Re: De-cat
Post by: hayesey on March 17, 2009, 08:04:22 PM
yeah you still need to fit the lambda probe, if you buy a decat pipe then it'll have the nut for the probe in it already.  If you make your own decat then you'll have to weld a nut in.
Title: Re: De-cat
Post by: samg40 on March 17, 2009, 08:12:58 PM
I took mine for the MOT on Saturday without the cat and its a K reg, they put it through on a non cat test and it passed no problem (not even an advisory). Probably just lucky with it though, take it to one round the corner and they may fail it. Although a place I used to take it to apparently never had the G on thier system so always put it through as a non cat test even when the car had one.
Title: Re: De-cat
Post by: SuperMario on March 17, 2009, 08:21:34 PM
sweet thanks for the quick replys guys, im going to weld a pipe in , will just put a nut in then, just wasnt sure.