Text only | Text with Images

Club G40 Forum

Technical => Turbochargers => Topic started by: Max on January 28, 2009, 10:14:01 PM

Title: What size hose for K03 air filter?
Post by: Max on January 28, 2009, 10:14:01 PM
Chaps, any ideas on the size of this hose that comes off the turbo with the air filter?

(http://img.photobucket.com/albums/v210/SteG40/PoloG40008.jpg)

Also, Ste if you read this mate, does the hose get bigger the air filter end?
Title: Re: What size hose for K03 air filter?
Post by: lance on January 30, 2009, 04:24:43 PM
i take it that hose is sleaved over something as the inlet into the turbo is tiny!
Title: Re: What size hose for K03 air filter?
Post by: Max on January 30, 2009, 04:49:35 PM
Yeah probably, I just need to know what hose to get and whats the best set up to run.
Title: Re: What size hose for K03 air filter?
Post by: SteG40 on January 30, 2009, 05:02:31 PM
I'm not sure Max, I will have a look at it over the weekend.
Title: Re: What size hose for K03 air filter?
Post by: Max on January 30, 2009, 05:05:59 PM
Cheers mate.
Title: Re: What size hose for K03 air filter?
Post by: SteG40 on February 01, 2009, 05:45:23 PM
I've had a look and it's two pieces of samco. The one in the photo is 2.5 inch diamater from the outside edge it's just a straight pipe and then there is another piece about an inch or so long and 2inc diamater that fits inside one end to reduce the size so it fit's onto the turbo.
Text only | Text with Images