Print Page - 1w bottom end

Title: 1w bottom end
Post by: guism on January 12, 2016, 07:27:58 AM

Hi to all of you :)

I´ve read a lot about this mods (about using ABD, 1W, etc) and i really want to start building my engine (PY engine).
So, can i use 1w Block With 1W crank and PY g40 original Rods and pistons?

Regards

Title: Re: 1w bottom end
Post by: PeteG40 on January 12, 2016, 07:28:49 AM

Simply... no. Requires custom pistons

Title: Re: 1w bottom end
Post by: polo classic on January 15, 2016, 02:11:29 PM

There has been a few builds in Germany using G40 pistons, milled down for lowered CR, Christian Ebels 1,4L ITB G60 comes to mind

Would not recommend it though

Club G40 Forum

Technical => Engine and Transmission => Topic started by: guism on January 12, 2016, 07:27:58 AM