Print Page - ECU pressure sensor

Title: ECU pressure sensor
Post by: physicsfool on January 30, 2015, 11:07:47 AM

I was wondering what to do with the sensor on top of the ECU now that i dont have a vac hose to attach it to? As its in a mk2

Blank it off or leave it open?

Ta

Title: Re: ECU pressure sensor
Post by: PeteG40 on January 30, 2015, 11:11:07 AM

you need the vac hose attached to it!

Title: Re: ECU pressure sensor
Post by: physicsfool on January 30, 2015, 11:18:38 AM

So attaches to the fuel pressure regulator and the Inlet mani...... but if my memory serves me correct its also attached to the servo. which i dont have

Title: Re: ECU pressure sensor
Post by: physicsfool on January 30, 2015, 12:29:28 PM

http://www.polog40.co.uk/forum/index.php?topic=4555.0

Hayesey has in spirit solved my issue.

Cheers

Title: Re: ECU pressure sensor
Post by: PeteG40 on January 30, 2015, 06:15:13 PM

Block the servo hose not the vac take off

Club G40 Forum

Technical => Electrical => Topic started by: physicsfool on January 30, 2015, 11:07:47 AM