Unfortunatly it pains me to become a g40 killer but my lhd polo as advertised in the cars for sale
section is now being broken,
all car currenly available someone however does have dibs on the interior
and bumpers
the engine will not be for sale however the engine from scotti p s mk2 conversion
is for sale instead, this a standard lump with roughly 120k on it with a charger rebuild by ocd
with recipt will have to work out milage on charger but wont be any more than 3k, charger is an ocd stage 4, or will be a rebuilt by me standard charger, only one of either of these are available
ecu available
loom available in good condition no spliced wires
Will split engine as far as block and head together, gerbox and ancillaries separate
All body panels are rust free, doors are good
wings are eu spec with no side repeaters not wielded up ones where it would be a prone rust spot
boot lid is spot on
all glass is un etched and in good condition
Eu spec rear light right hand side
head lights in good condition
heater works well with resistor fitted
any other parts not mentioned feel free to ask, once stripped the bare she will be scrapped unless anyone wants it for scrap value as a track car shell,
again apologies for being a g killer but needs must and I want my mk2 mint so its heart will live on!
Location?
Apologies location is yeovil somerset
lhd g40 dont count as part of the death toll.
It's like eating another species, that's fine.
Im not to worried any way im making an almost mk2 replica g40 with the proceeds
Did you try and advertise it on the continent? You might have had more luck selling it in germany, france etc?
What are you doing with the 3 gauge slot thingy, you keeping that?
Pm'd you pal....
How much for the box?
£250 for the atv box robin
what colour is it ?
and how much for boot lid, headlights and if you have it the plastic side skirt trim ?
Right started the breaking today!
Wings were a pig to remove. But are straight and rust free just need a prep and respray
The bonnet as stated in the original add had a huge paint chip missing which I badly filled
just needs rubbing flat and spraying, good condition though
boodlid is dare I say it perfect
Doors are staight and rust free
interior is sold and so are the bumpers and exterior mouldings
Havent started the engine swaps and removal yet
I have half a litre of 2k schwarts black with hardner and laquer for the panels
if anyone is interested in that
pm me for any details
all parts are collection only, feel free to organize your own couriers and I can wrap and package anything for you
How much for the looms not including the engine loom.
Also the fueling setup. Pipes filter pumps pipes?
I'm in Wakefield West Yorkshire so my need posting.
Cheers.
Quote from: Freddy77 on March 28, 2014, 06:00:56 PM
Right started the breaking today!
Wings were a pig to remove. But are straight and rust free just need a prep and respray
The bonnet as stated in the original add had a huge paint chip missing which I badly filled
just needs rubbing flat and spraying, good condition though
boodlid is dare I say it perfect
Doors are staight and rust free
interior is sold and so are the bumpers and exterior mouldings
Havent started the engine swaps and removal yet
I have half a litre of 2k schwarts black with hardner and laquer for the panels
if anyone is interested in that
pm me for any details
all parts are collection only, feel free to organize your own couriers and I can wrap and package anything for you
how much for the front and back seats doors cards and carpet
Bump,
wings left and right hand still abailable
Doors
bonnet
g40 intlet x2
throttle body standard
fuel rail
standard injectors
g40 standard cam
All windows still fitted to the shell
fuel pump
2x standard intercoolers
head lights
indicators orange
rear lights, orange full colour no reverse light
Standard grille no clips broken with black badge
Loads more stuff pm if interested
collection from somerset yeovil area
How much for the front brake set up posted?
Thanks :)
m8 how much for the front bumper please?
would you cut sections out of the shell?
I would cut sections from the shell but only once its fully stripped,
front bumper is gone
front brake setup is staying until I make sure my mk2 brakes are good enough but if there fine ill pm you
pm'd
Hi there. How much for the two wings and brake servo?
wings are 35 each and brake servo is a tenner
have you got o/s rear plastic wheel arch??
Hi. Is the brake servo in the same location as on a rhd polo? Are they the same item?
Its on the opposite side but I believe its the same item,
Ok. Can you please your PayPal details and I'll pay you Tuesday for the servo. Plus I need it posted to me please.
how much for the glovebox lock, parcel shelf and steering wheel?
thanks.
Any chance I can get any of this
Standard throttle body
Standard charger
Standard exhaust cat back
Standard radiator
Boost pipe, intercooler to charger
Rocker to throttle
Rocker to charger
Throttle to plastic pipe
Plastic pipe to bit at the front panel
Cheers dude
I have still a
throttle body
plastic boost pipe and 'shelf'
A nearly new rad
and most of the boost pipes mate
how much for the glovebox lock, parcel shelf and steering wheel?
thanks
Quote from: youngprodigys on April 19, 2014, 10:55:31 PM
would you cut sections out of the shell?
Any closer to this? I would be keen for sills if so (uk drivers side)
Hi man, i'm after ecu, engine loom and block if poss, cheers
Sorry dude im down to a shell so anyone that wants bits cutting off pm me