Anyone got the part number for the rubber dust cover on the end of a polo TCA balljoint
No sure vw do em.. but can get generic ones on ebay
Yeah i just bought an ebay number for the curved steering arms tie rod boot. decent quality boot and clips for £2.45
Ah right, do you have a link? i presume its the same size one for the tca balljoint
http://www.virbante.lt/en/hinge_parts/prod_83
Thats the part number
Dimensions: OEM:
- T=15 mm 025-0002-904-009
- F=33 mm
- H=21 mm
- D=42 mm
If anyone needs any in future i just ordered 2 from :- http://www.ebay.com.au/itm/Ball-Joint-Rubber-Boots-2pcs-Suspension-Protective-Rubbers-universal-/261388470987?
Its the code D ones.
http://www.ebay.co.uk/usr/advantageautopartsltd?_trksid=p3984.m1497.l2754
These are the chaps
Yea i was looking on there, theyre close but not close enough to the original size. see post above.
Finally got the right size (sent me a medium first instead of a small) looks like a good fit.
I am really struggling to get the bottom clip and boot over the lip. anyone done this before and can hand out any hints?