Club G40 Forum

Technical => Electrical => Topic started by: gavin.starr on March 08, 2011, 03:22:15 pm

Title: Genesis to G40 wiring
Post by: gavin.starr on March 08, 2011, 03:22:15 pm

Apart from the engine loom is there any other form of wiring that needs to be replaced with the G40 equivalent, ie is the wiring to the rear pump all the same etc etc...

Gav

Title: Re: Genesis to G40 wiring
Post by: cheys03 on March 08, 2011, 10:54:32 pm

Genesis are generally later spec so depending on the age of your G40 conversion you may run into late spec-> early spec issues e.g. oil pressure sensors, engine bay/headlight loom->ECU loom mating. That's all I can think of right now

Title: Re: Genesis to G40 wiring
Post by: gavin.starr on March 09, 2011, 04:17:56 pm

Its an L reg if that helps, im not sure what the age of gar the G came out of

Title: Re: Genesis to G40 wiring
Post by: cheddarcheese on March 15, 2011, 11:42:16 pm

you only need to change the engine side of the loom! and change the fuel pump to a g40/gt pump


there are two looms in the engine one for the ecu main engine loom and 2nd for the headlights and peripherals you may just need to change the ecu loom!