Ok been doing some reading into redline 10wt, which im looking to use, is 27.2 cst @40°C. Think the pump will be able to handle it?
I could go for the 5wt 21.8 cst or the 2wt which is 11 cst but i dont think that 5wt and 2wt are really suitable as its to be used under temps of 71°C (5wt) and 65°C (2wt) whereas i might get close even above that.
Fuel is between 0-5 - 0.74 cst @ 40°C but i think it will be hard to get oil that close.
This is the data from redline:
Phosphorus, avg PPM 2500
Zinc, avg PPM 2400
Vis @ 100°C, cSt 5.2
Vis @ 40°C, cSt 27.2
Viscosity Index 130
CCS Viscosity, Poise, @*C 30@-30°C
Pour Point, °C -54
Pour Point, °F -65
Flash Point, °C 215
Flash Point, °F 420
NOACK Evaporation Loss,
1hr @ 482°F (250°C), % 6
Will it be runny enough?