Club G40 Forum
Reviews => Company Reviews => Topic started by: DaveG40 on May 02, 2008, 03:28:08 pm
-
http://www.jprace.net/
Top Quality Gearbox Mechanics - Very happy to deal with ATV G40 boxes.
I got all my old bearing shells / pinion gears back in a bag and paid £329.99 for a rebuild, new pinion gear set and labour including VAT!
Top Company - Many Recommend!
Contact Details on Above Page Link
Dave
-
I thought they were pretty good with my ATV as well although they didnt replace the selector bush as they said 'i didnt ask them to' which meant i had to fit it myself a month or so later as it was leaking..no leaks now obviously so it was a little frustrating a month or so after a rebuild to find they hadnt changed everything that could leak. plus they seemed like they were ready to be arsy when i rang them about it. other than that they were ok the box came back quickly enough and ther=y were very reasonably priced!
-
I'm going to be taking mine there soon, hopefully with a LSD to fit at the same time. I assume they fit them?
-
They do indeed! Good chaps down there, really helpful.
-
Very friendly and helpful. I liked the fact that you got returned all the buggered up bits they'd replaced - at least then you knew what they had and hadn't done.
Only complaints are that they didn't replace the layshaft bearings, so it's now rattling, and they got the output shafts on the wrong way round.
-
I have good news to report on them too.
Fast, friendly & efficient service!!!
-
mmmmmmmm - They certainly used to have a good name for themselves... But i get the feeling the satarday boy / trainee gets all the polo boxes as they dont deem them inportant enough to do propery.
I wont be using them again...
-
Luckily mine got new bolts that were thread locked in. Still had to check though.
-
Are the ATV boxes particularly differcult to overhaul then, admittedly I never been in mine, just done the selector bush and seal and did a complete refil with Torco race spec gear oil?