I'm running a slimline fan on my turbo build.
You have the 3pin out of the fan switch for the 2 stage speed fan as standard but obviously slim line fans just have a power and earth.
Whats the best thing to do here?
Do I take to higher speed setting wire into a relay and just leave the low speed out? so it just cuts in at a stage 2 temp or use the low speed one? For a lower temp cut in? As its going to be relayed fan speed is going to be the same no matter what as it's just a 12v from the relay to the fan
I'm running a lower temp stat and fan switch
Stat opens at 71'C
Switch stage 1: 80'C, stage 2 : 85'C
So I was thinking stage 2 as I don't want it cutting in every 5 mins even though its still will at 85 on a hot day
My other option is just running an adjustable fan controller set it to the temp I want it to cut in and run a manual switch as well
What are you guys doing with yours?
Thanks in advance