Club G40 Forum
Club Sponsors => Polo Performance Parts => Topic started by: Yoof on February 25, 2009, 05:52:49 pm
-
Fuel Injector Cleaning
With some G40s, 20 years of service is just round the corner- so it will come as no surprise that certain components will require attention/refurbishment.
Often overlooked, a healthy fuel system is a necessity before seeking more power.
Polo Performance Parts can now offer a full injector cleaning service & diagnostic report for all Bosch/Siemens style injectors.
Using the latest ASNU equipment, injectors are ultrasonically cleaned and have the following diagnosed:
1) Spray Pattern
2) Resistance
3) Flow rate at all duty cycles
4) Maximum static flow rate
If repairs are required we can also replace internal filters and pintle caps where necessary. O-Rings are replaced on every set of cleaned injectors.
£35/set (4) inc. return postage.
(http://img.photobucket.com/albums/v251/Young_Un/250cc.jpg)
Injectors For Sale
Alongside cleaning/testing your injectors we also offer refurbished components which come fully cleaned & tested with new o-rings and pintle caps where necessary.
Please contact for prices, we currently have in stock:
250cc/min Bosch injectors, well matched set of four, Red in colour, fully cleaned & tested. £65 inc delivery- 2 sets available.
-
awesome, great price too, will be zaping mine down
what will the cost be if it requires new filters, or pintle caps?
-
Couple of quid extra, nothing too alarming, just takes a little longer to get the filters out. I'll only replace them if the injectors need it :)
-
cool man no problem, i will send my set down, and i think my mate wants his doing too
pm me or msn me an address to send em to
cheers :D
-
might send mine to you too
-
Red G60 injectors? makes me wonder now if the ones i have are 310cc or not!
-
check the part number on them against the list in the "articles" section on the main site. Colour doesn't mean anything, you can get injectors in all sorts of flow rates that have red tops.
-
As Haysey says coding injectors by colour is possibly the worst thing you can do, some 'greens' are 600cc+ go by flow rate and you know where you are.
I've got some 310cc/min ones if you need them Jon- they're Yellow though :P
-
i'm getting Phil to check the code on them for me.
-
PM me the part # and I can do it ;)
-
anyone wanting to check flow rates from part codes on bosch injectors. use this table which is on the website:
http://www.polog40.co.uk/article_injector_table.php
Use the search function in your web browser (usually ctrl+f) and type the code in off your injectors with no spaces.
-
hi im intrested in a set of 250cc injectors
thanks
darren
-
hey I need some 300cc injectors for a mapped chip i have also need a 250kpa map sensor if you can help cheers
-
Got 2 sets of 250cc injectors in stock at the moment :)
Is it 300cc specifically that you want, or 310cc?
PM Andy Regarding a map sensor.
Thanks,
Pete
-
I'd like my injectors cleaned please, can you pm me postal address and payment details ? Thanks
-
Hi Yoof, I defo need a set of the 250cc injectors, my car is sat waiting.......
-
Got a set in stock, give me until next week to clean them. E-Mail your address to: enquiries@poloperformanceparts.co.uk and I'll send you some payment details
-
Sorry to be a pain but how long will they be? I only ask cos when I said my car was waiting, it is at The Phirm with its bonnet up in their workshop kinda waiting!!!
-
I can do them mid week but I always post things out on a Friday as I work during normal post office hours.
-
Ok no worries. Im gonna talk to The Phirm this morning. So I shall let you know.
-
Hi Yoof
I have sent a couple of e-mail now and doesnt seem like they are getting through my end. My e-mail is rj.nichols@btinternet.com.
Cheers.
-
Hi Guys
I still haven't heard anything re payment details for the red tops. I really need them to be paid for and sent to The Phirm this friday as a) I want my car back (and more importantly) b) The Phirm are starting to get the arse with my car being down with them.
So Please could I have some details about payment.
Thanks.
-
Red tops?
I've got a set of 250cc/min injectors (green in colour) that I can post out on Friday. I've sent you an e-mail with details about payment.
Cheers
Pete
-
opps got a bit confused as your front page shows red ones
Wonderful cheers. :-\
-
You should advertise this in your CP forum/site if you're still doing it? Been looking for someone to do a G40 set for the GT.
-
got any 310cc red top's about ?
-
I think I've got a spare set of 315cc, possibly...
I moved house a few months back and most of my car parts are 100miles away, so it might be a while before I can check.
Pete
-
Aw a see, well I'll keep my eyes open.
Thanks anyways yoof
-
Hello!
I am interested in the injectors. are like the OEM?
-
hi yoof have you got any 250cc injectors for sale?????thanks
-
i need a set doing, but need a postage address.
cheers, Liam
-
Sent it to you in e-mail yonks ago dude :)
If you can't find it, ping me a mail: enquiries@poloperformanceparts.co.uk and I'll send it over again.
Please note I no longer have access to the injector test rig, but can get them done, just take longer.
-
just sent an email over.
-
Hey ive got a set of G60 injectors and would like to get them cleaned do you have an email adress to talk someone about sending them over?
cheers
-
enquiries@poloperformanceparts.co.uk
-
Cant get my email to work at the moment, but im looking to get my injectors cleaned, they are standard as far as im aware off
the only thing is, i use my car as a daily. any chance we can get round this? have you got a cleaned set dossing about?
i can pay a surcharge?
Taylor
-
They've stopped doing this now dude, I enquired a while back
-
They've stopped doing this now dude, I enquired a while back
where did you get yours done in the end?
youve got a set for sale haven't you? i would buy them but it means id need a remap :(
-
You dont need a remap. What size injector you got now?
-
Pretty sure they are standard ones (will double check)
im sure ive read multiple times that you cant just stick g60 injectors in, you need a remap to run them, correct me if im wrong
Taylor
-
Stuck mine on and were fine, until i put a psd chip in then they melted a piston.
You dont need bigger injectors unless your going over a certain bhp. I only put them in to be safe as i would of been close to the standard ones limit.
-
Pretty sure they are standard ones (will double check)
im sure ive read multiple times that you cant just stick g60 injectors in, you need a remap to run them, correct me if im wrong
Taylor
You're correct. You shouldn't run 250cc injectors on a chip designed for standard items.
-
Well i use my car as a daily, it has no service history at all whats so ever
im going on a trip to switzerland in june and keep reading about people melting pistons, so as injectors are pretty important lol and mine have no history id like to get them cleaned. but it makes sense to uprate them if its going to be pretty much the same price as cleaning mine ( i asked on here as its only £35 to get them cleaned, or was) if i get g60 injectors i need a new chip, but thats a waste of money as in the future im getting a ported g, aggresive cam and BVH so would be a waste of money getting a chip just for injectors. i dont have the money at the moment to get it all at the same time (unless someone has a bargain :P)
get me?
Taylor