Club G40 Forum
Technical => Superchargers / G-Lader => Topic started by: G40jamie on August 08, 2013, 05:01:01 pm
-
I've had my forty up and running now for a few weeks, boosting fine no issues, and whether this is coincidence or not i don't know, but as soon as i fit my 65mm pulley, the boost slowly disappeared then just went, when we first fit the 65mm pulley anda boost gauge, was pushing half a bar, now nothing, what could this be? ive checked all the vacuum pipes, breathers, the belts and the pulley but i cant seem to find anything :/ what could this be??
-
Sounds like a boost hose coming off, when I fitted my 65mm kit the inter cooler hose was the issue! Just check all the boostclamps
-
Check the charger to intercooler pipe. Might of gone through the walls, after fitting toothies to mine the pipe blew.
-
belts tight enough.
checked the strainer in the intercooler?
-
id like to say i checked everything, might have to just take it apart and put it back together and see what happens
-
think its the seals in the charger :(
-
What signs of that? Usually lots of oil pissing out the outlet when you disconnect it.
-
Check the auxilary air valve that runs to the bottom of the inlet manifold