Club G40 Forum

Technical => Electrical => Topic started by: Dan on September 02, 2009, 06:36:36 pm

Title: Central Locking (wiring)
Post by: Dan on September 02, 2009, 06:36:36 pm

I have a spal 2dr CDL kit. Both solenoids have 5 wires and connect to a control unit. The control unit only has a wiring diagram that shows battery feed, earth and colour connecting to the solenoids (nothing else).

I wan't to connect my alarm central locking activation to the central locking don't know which wires operate the solenoids or control unit. The alarm has positive and negative central locking operation. Can anyone tell me how to work out how to wire it up ?

Title: Re: Central Locking (wiring)
Post by: Dan on September 03, 2009, 08:16:50 pm

The Alarm wiring is no problem, I have the diagram. This is all I got with the central locking:

(http://img.photobucket.com/albums/v174/hardhitter/misc/SpalCDL.jpg)

Title: Re: Central Locking (wiring)
Post by: Dan on September 04, 2009, 10:45:51 am

It's a bit poor that you get a good quality brand like Spal and it doesnt appear to have an alarm input. I've had a look round and found another kit which does have, for £15.