Club Sponsors > Polo Performance Parts

Subframe Fitting Guide- Hints & Tips

<< < (3/3)

Yoof:
A general purpose LM grease will suffice, the easiest way to get the dust jacket on is to heat them slightly (warm water) dry them off, then stretch them over. If you have some circlip pliers they can help.

Bit of a struggle, but definitely worthwhile putting them on, if you do damage them then Rally Design sell replacements for a few quid.

Cheers

Pete

scully:
Thanks for your reply, I will give it a go one of these days. LM grease is just regular bearing grease? If so, I can take some from work.

UJA:
Currently struggling to fit my stage 3 frame, I have the rear tcas in place bolted up, now I'm onto the front ARB mounts. The Allen key bolts provided don't go through the hole on the rear side of the front ARB mounts. The frame doesn't allow it?! Has anyone had this problem and what's the solution?

Navigation

[0] Message Index

[*] Previous page