Technical > Superchargers / G-Lader
rebuild time
(1/1)
dannyb.G40:
I reckon its coming around time to get a rebuild and i wonder if anyone can help. At the minute im running a 65mm pulley and loving the power ^_^ but im not keen on running such a small pulley. What i put to you lot is:
would say an R1 or equivalent port stage and a standard pulley, give about the same boost as a standard charger with a 65mm pulley (I get about 11PSI as it is currently stands). And more importantly which puts more strain on the charger?
although i am lookin at buyin one of those brand new chargers that Yoof's mate is sellin :ph34r:
Cheers, Danny
PeteG40:
std charger with 65mm pulley is about 0.9bar
flowed charger with normal pulley is about 0.6/7 bar
pulley is what strains really
pete
Navigation
[0] Message Index
Go to full version